{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2AS18KN16M1B1","brand":"Omron","brandSlug":"omron","productSlug":"E2AS18KN16M1B1","canonicalUrl":"https://aoctrl.com/omron/E2AS18KN16M1B1","factsUrl":"https://aoctrl.com/api/mcp/products/E2AS18KN16M1B1","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2A series inductive proximity sensor, M18 non-flush, 16 mm range, NO (make) contact output, M12 4-pin connector.","salesMarkdown":"The Omron E2AS18KN16M1B1 is an M18 inductive proximity sensor from the E2A series, delivering a 16 mm sensing distance in non-flush mounting. It switches a normally-open (NO) contact when a metal target enters range, rated for loads up to 200 mA across the 10–32 V supply band. The stainless-steel housing and IP67/IP69K protection make it suitable for washdown environments, food processing, or pharmaceutical fill suites where high-pressure cleaning cycles are routine. The 16 mm sensing distance applies to mild steel targets under standard conditions; derate for non-ferrous metals or when the sensing face is shielded by adjacent steel. Repeat accuracy is 10%. The NO output transitions when a metal target enters the field; with no target present the output is open. Its 200 mA continuous load capacity drives small contactors, PLC inputs, or relays directly. Current consumption of 10 mA from the supply is negligible for most power budgets. M12 4-pin connector mates to standard industrial cordsets. The 24 mm wide by 24 mm high by 53 mm long body is a compact M18 barrel format — check gland-plate clearance if retrofitting into an existing panel cutout. The E3SAT36 is a photoelectric with 7 m sensing range, requiring a reflective target and offering PNP light/dark-on switching. The E2AS18KN16M1B1 is inductive — it only detects metal targets at 16 mm — so it is not a direct electrical or mechanical swap. A panel originally built for the E3SAT36 would need rewiring (NO vs PNP) and different mounting. If your application strictly calls for metal presence in a compact machine cell, the inductive sensor may serve the same functional role without a reflector, but verify output type and sensing distance ahead of any BOM change.","metaTitle":"Omron E2AS18KN16M1B1 Inductive Sensor, 16 mm, NO, IP69K","metaDescription":"Omron inductive proximity sensor, M18 non-flush, 16 mm sensing distance, NO output, 200 mA load. IP67/IP69K sealed, stainless steel. Active production, sourced to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"Width":"24 mm","title":"E2AS18KN16M1B1","Height":"24 mm","Length":"53 mm","Series":"E2A","description":"Inductive Sensor Make Contact (NO) 32V 10mA 16mm Connector, M12, 4-Pin IP67 / IP69K E2A","Load Current":"200 mA","Mounting Type":"Non Flush Mount","lifecycle_stage":"current","Housing Material":"Stainless Steel","Termination Type":"Connector, M12, 4-Pin","Construction Form":"M18","Protection Rating":"IP67;IP69K","Current Consumption":"10 mA","Repeat Accuracy (%)":"10 %","Sensing Distance Max.":"16 mm","Operating Voltage Max.":"32 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"70 °C","Operating Temperature Min.":"-40 °C","Inductive Sensor Output Type":"Make Contact (NO)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$30.48 – $56.95","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e59494d70bfbc3dd5c8eb901241e3116.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can the E2AS18KN16M1B1 replace an E3SAT36 photoelectric sensor without rewiring?","answer":"No. The E3SAT36 uses PNP output and light/dark-on switching at 7 m range, while this sensor is an inductive NO contact for metal at 16 mm. The wiring and output logic differ, plus the mounting footprint is not the same."},{"question":"What are the key dimensions of E2AS18KN16M1B1?","answer":"Width 24 mm, height 24 mm, length 53 mm. It is an M18 barrel form factor with a non-flush mounting requirement."},{"question":"What is the sensing distance and output configuration?","answer":"Sensing distance is 16 mm (mild steel), output is normally-open (NO) contact, rated for 200 mA continuous load."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2AS18KN16M1B1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2AS18KN16M1B1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}