{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2BS08KN04WPB12MOMI","brand":"Omron","brandSlug":"omron","productSlug":"E2BS08KN04WPB12MOMI","canonicalUrl":"https://aoctrl.com/omron/E2BS08KN04WPB12MOMI","factsUrl":"https://aoctrl.com/api/mcp/products/E2BS08KN04WPB12MOMI","rawCanonicalId":null},"summary":{"shortDescription":"M8, Non-Flush, PNP NO, 4 mm, 10–30 VDC, 200 mA, 1 kHz, Pre-Wired, IP67, Stainless Steel.","salesMarkdown":"## What this sensor is The E2BS08KN04WPB12MOMI: M8 inductive proximity sensor from the E2B series, PNP normally open output. Non-flush mounting means it must be installed with an air gap around the sensing face—no embedding in metal. Switches 200 mA loads at up to 1 kHz, powered from 10 to 30 VDC. Pre-wired cable, no connector to source separately. ## Choosing between this and the flush-mount sibling The closest sibling is the E2BS08KS02MCB120OMS: flush-mount, 2 mm sensing, M8 connector, same output type. This part (E2BS08KN04WPB12MOMI) doubles the sensing range to 4 mm thanks to the non-flush design, but requires clearance around the face. The pre-wired cable on this one vs the sibling's connector means a different strain relief and termination method. If the panel pocket is recessed for a flush sensor, this non-flush part won't fit correctly without modification. Mount with the non-flush face exposed; if installing in metal, maintain an air gap per Omron's guidelines for the M8 size. Stainless steel housing and IP67 rating suit washdown zones. Pre-wired cable carries the three PNP wires (brown, blue, black); verify termination polarity before powering.","metaTitle":"E2BS08KN04WPB12MOMI M8 Inductive Sensor, 4mm PNP NO","metaDescription":"Active M8 PNP NO proximity sensor, 4mm range, 30V, 1kHz, pre-wired, IP67, stainless. Source through RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"title":"E2BS08KN04WPB12MOMI","Length":"42 mm","Series":"E2B","description":"Inductive Proximity Sensor PNP, Make Contact (NO) 1kHz 30V 10mA 4mm Pre-Wired IP67 E2B","Load Current":"200 mA","Mounting Type":"Non Flush Mount","lifecycle_stage":"current","Housing Material":"Stainless Steel","Termination Type":"Pre-Wired","Construction Form":"M8","Protection Rating":"IP67","Current Consumption":"10 mA","Switching Frequency":"1 kHz","Sensing Distance Max.":"4 mm","Operating Voltage Max.":"30 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"70 °C","Operating Temperature Min.":"-25 °C","Inductive Sensor Output Type":"PNP, Make Contact (NO)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$54.20 – $56.70","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bf62a03821be86a920f9a3d9fb401fae.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can I use this sensor to replace the E2BS08KS02MCB120OMS in my panel?","answer":"Not without design changes. The E2BS08KS02MCB120OMS is flush-mount with 2 mm sensing and an M8 connector; this part is non-flush, pre-wired, and senses 4 mm. Mounting, cabling, and target switching behavior differ."},{"question":"What is the sensing distance and output type?","answer":"Sensing distance is 4 mm (non-flush), output is PNP normally open, switching up to 1 kHz."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2BS08KN04WPB12MOMI","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2BS08KN04WPB12MOMI when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}