{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2E-X10MY2-US 2M","brand":"Omron","brandSlug":"omron","productSlug":"E2E-X10MY2-US-2M","canonicalUrl":"https://aoctrl.com/omron/E2E-X10MY2-US-2M","factsUrl":"https://aoctrl.com/api/mcp/products/E2E-X10MY2-US%202M","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2E-X10MY2-US 2M, E2E series, inductive proximity sensor, AC 2-wire normally closed output, unshielded, 10mm sensing distance, 2m PVC cable, UL certified.","salesMarkdown":"The Omron E2E-X10MY2-US 2M is an inductive proximity sensor from the E2E series, delivering a 10mm sensing distance with an AC 2-wire normally closed output. Unshielded construction means it detects metal targets without a side shield, but that also leaves it more exposed to noise from nearby conductors or drives. The 2-meter PVC cable terminates in flying leads for direct connection. ## Wiring and signal integrity Since this is an AC 2-wire device, it draws its operating power through the same pair that carries the switching signal. Verify the load impedance stays within the sensor's rated operating range – if the load is too light, the off-state leakage current can keep a PLC input falsely high. With an unshielded sensing face and no built-in self-diagnosis, any intermittent trigger should first point to conducted noise on the cable run. Keep the sensor cable away from VFD output conductors and use twisted-pair if the run exceeds 10 meters. A buyer cross-shopping the E2KQ-X10ME1 will find a capacitive sensor, not inductive. Different physics: the E2KQ-X10ME1 triggers on dielectric changes, not on metal presence. Electrically, it uses a 3-wire NPN-NO output at 10-30 VDC, whereas the E2E-X10MY2-US 2M runs on AC and switches NC. The mounting hole patterns and cable lengths differ. No direct drop-in – if the original spec was the capacitive unit, rewiring and possibly a different target material are required.","metaTitle":"Omron E2E-X10MY2-US 2M Inductive Proximity, AC 2-wire, 10mm","metaDescription":"Omron E2E-X10MY2-US 2M inductive proximity sensor, AC 2-wire normally closed, unshielded 10mm sensing distance, 2m PVC cable. UL cert. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"Part #":"E2E-X10MY2-US 2M","Weight":"0.16 kgs","Category":"Limit and Proximity Switches","Shielding":"Unshielded","Model Type":"UL cert","Cable Specs":"PVC cable","Cable Length":"2 meter cable","Sub Category":"Proximity Detection Switches","Top Category":"Switches","Self-Diagnosis":"No self-diagnosis","lifecycle_stage":"current","Sensing Distance":"10 mm sensing distance","Switching Output":"Normally closed","Oscillation Frequency":"Standard frequency","Power Supply & Output":"AC 2-wire"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$199.20","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/E2E-X10MY2-US%202M/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional second-source for the E2E-X10MY2-US 2M?","answer":"The E2KQ-X10ME1 is a different sensor type (capacitive vs inductive), operates on DC (10-30 VDC, NPN-NO) rather than AC, and requires 3-wire wiring. It is not a direct functional substitute."},{"question":"Will the E2E-X10MY2-US 2M drop into a panel specified around the E2KQ-X10ME1?","answer":"No. The wiring differs (AC 2-wire versus DC 3-wire), the output logic (NC versus NO), and the sensing technology (inductive vs capacitive). The entire sensor circuit would need rewiring and the target material might not work with inductive sensing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2E-X10MY2-US-2M","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2E-X10MY2-US-2M when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}