{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2EX16MB1TL182MOMS","brand":"Omron","brandSlug":"omron","productSlug":"E2EX16MB1TL182MOMS","canonicalUrl":"https://aoctrl.com/omron/E2EX16MB1TL182MOMS","factsUrl":"https://aoctrl.com/api/mcp/products/E2EX16MB1TL182MOMS","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2E-Next M18 inductive proximity sensor, 16 mm non-flush, PNP NO, 10–30 V supply, 200 mA load, IP67/IP67G/IP69K, 2 m cable, order code E2EX16MB1TL182MOMS.","salesMarkdown":"## Integrator's note The Omron E2EX16MB1TL182MOMS is an M18 inductive proximity sensor in the E2E-Next series, built as a non-flush, 16 mm snout with a PNP normally-open output and a 2 m integral cable. Switching frequency is rated at 400 Hz and the operating envelope runs from -40 °C to 85 °C, so it keeps up with high-cycle target motion and tolerates unheated cabinets or engine-room mounting. The housing is brass with a nickel-plated finish, sealed to IP67, IP67G, and IP69K on a single body rating block — fine for washdown cells and outdoor skids where the same sensor has to live. ## What the ratings decide The 16 mm maximum sensing distance is the non-flush figure, so mounting clearance to surrounding metal matters: respect the non-flush correction factor when siting it near brackets or other sensors. 200 mA load current is the ceiling the buyer plans against — it covers small solenoid valves, indicator lamps, and PLC inputs without an interposing relay. IP67/IP67G/IP69K on a single device covers submersion, oil ingress, and high-pressure, high-temperature jet spray, which is why this body style is common in food-grade and mobile-equipment panels. ## Where this class sits The E2E-Next series is an inductive proximity line from Omron for general-purpose detection on industrial automation panels and field wiring. ## Comparison against same-family siblings Versus the E2EX16MB1T182MOMS in the same series and output class, the only meaningful delta is the body length: this code is 77.3 mm long on the cable end while the 2 m cable sibling measures 55.3 mm — pick this one when the pigtail needs to clear a deeper gland or threaded boss. The E2EX16MB1TL18M1OMS in the same output class drops the cable for an M12 4-pin connector and shortens the body to 75 mm; it is a wiring topology swap, not a rating change, so a panel cut around the cable style cannot take the connector version without re-terminating. The E2EX16MB1T185MOMS keeps the 2 m cable format and only extends the lead to 5 m, which is a reach decision, not a fit decision.","metaTitle":"Omron E2EX16MB1TL182MOMS, M18 16 mm PNP NO cable","metaDescription":"Omron E2EX16MB1TL182MOMS E2E-Next M18 inductive sensor, 16 mm non-flush, PNP NO, 10-30 V, 200 mA, IP67/IP69K, 2 m cable; current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"title":"E2EX16MB1TL182MOMS","Length":"77.3 mm","Series":"E2E-Next","description":"Inductive Sensor PNP, NO 400Hz 30V 16mA 16mm IP67 / IP67G / IP69K Cable, 2 m E2E-Next","Load Current":"200 mA","Mounting Type":"Non Flush Mount","lifecycle_stage":"current","Housing Material":"Brass Nickel Plated","Termination Type":"Cable, 2 m","Construction Form":"M18","Protection Rating":"IP67;IP67G;IP69K","Current Consumption":"16 mA","Switching Frequency":"400 Hz","Sensing Distance Max.":"16 mm","Operating Voltage Max.":"30 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"85 °C","Operating Temperature Min.":"-40 °C","Inductive Sensor Output Type":"PNP, NO"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$97.46 – $110.45","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/50fb63c54bd090ef5e85ef09d264627a.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the closest functional second-source to E2EX16MB1TL182MOMS in the series?","answer":"The same-family E2EX16MB1TL18M1OMS matches every rating and output class but uses an M12 4-pin connector in place of the 2 m cable; treat it as an alternate only after the customer's AVL/AML allows the wiring-termination change."},{"question":"What length is listed for E2EX16MB1TL182MOMS?","answer":"The listed body length is 77.3 mm on this catalog line, while the shorter 2 m cable sibling in the same series is 55.3 mm."},{"question":"What series does E2EX16MB1TL182MOMS belong to?","answer":"It belongs to the Omron E2E-Next series of M18 inductive proximity sensors."},{"question":"Will E2EX16MB1TL182MOMS drop into a panel specified around the E2EX16MB1TL18M1OMS without rewiring?","answer":"No — the M12-connector version and this 2 m cable version match on output and sensing ratings but differ on termination, so the cable entry, connector cutout, and field wiring all have to change."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2EX16MB1TL182MOMS","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2EX16MB1TL182MOMS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}