{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2EX2Y22MOMS","brand":"Omron","brandSlug":"omron","productSlug":"E2EX2Y22MOMS","canonicalUrl":"https://aoctrl.com/omron/E2EX2Y22MOMS","factsUrl":"https://aoctrl.com/api/mcp/products/E2EX2Y22MOMS","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2E-X series inductive sensor, M12 flush mount, NC output, 2 mm sensing, 200 mA load, IP67, cable 2 m.","salesMarkdown":"Omron E2EX2Y22MOMS is a M12 flush-mount inductive proximity sensor from the E2E-X series. It detects ferrous targets at 2 mm, switches 200 mA loads at up to 264 VAC/VDC, and outputs a normally-closed (NC) signal. Rated IP67 with a 2 m PVC cable, it suits machine-tool feedback, conveyor presence, and hydraulic valve position in tight metal surroundings. ## NC vs NO: choosing the right output logic Compared to the near-identical sibling E2EX2Y12MOMS (NO output), this NC variant offers fail-safe under cable break: the output goes open when the sensor loses power or the cable is severed. The trade-off is a tighter temperature range (-25 to 70 °C versus -40 to 85 °C on the NO sibling). For panel layouts already wired for NC, this part drops in without rewiring the PLC input card; the terminal assignment is identical. ## Panel fit and installation Mounts in a 12 mm bored hole with the brass barrel; the 21 mm hex body takes a standard 21 mm wrench. The 2 m cable exits axially, so gland or connector planning needs clearance behind the sensor. Flush-mount permits embedment in steel without derating the 2 mm sensing distance — no extra standoff required.","metaTitle":"Omron E2EX2Y22MOMS Inductive Sensor, NC, 2mm, 200mA","metaDescription":"Omron E2EX2Y22MOMS inductive proximity sensor, M12 flush mount, NC output, 2 mm sensing, 200 mA, IP67, 2 m cable. Current production. RFQ for BOM line.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"Width":"21 mm","title":"E2EX2Y22MOMS","Height":"21 mm","Length":"43 mm","Series":"E2E-X","description":"Inductive Sensor Break Contact (NC) 25Hz 264V 2mm Cable, 2 m IP67 E2E-X","Load Current":"200 mA","Mounting Type":"Flush Mount","lifecycle_stage":"current","Housing Material":"Brass","Termination Type":"Cable, 2 m","Construction Form":"M12","Protection Rating":"IP67","Repeat Accuracy (%)":"10 %","Switching Frequency":"25 Hz","Sensing Distance Max.":"2 mm","Operating Voltage Max.":"264 V","Operating Voltage Min.":"20 V","Operating Temperature Max.":"70 °C","Operating Temperature Min.":"-25 °C","Inductive Sensor Output Type":"Break Contact (NC)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$104.89","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2650073ad6a94f0b2a1e2f9061ebb34c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Will E2EX2Y22MOMS drop into a panel wired for E2EX2Y12MOMS without rewiring?","answer":"No — the NC output on this part reverses the signal logic. The terminal connections are the same but the PLC input configuration must match the fail-safe state. A sensor-to-PLC cable swap alone will not work."},{"question":"What is the physical size of this sensor?","answer":"Body diameter M12, total length 43 mm, hex width 21 mm. The cable adds 2 m of flexible PVC."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2EX2Y22MOMS","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2EX2Y22MOMS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}