{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2EX3D28T2MOMS","brand":"Omron","brandSlug":"omron","productSlug":"E2EX3D28T2MOMS","canonicalUrl":"https://aoctrl.com/omron/E2EX3D28T2MOMS","factsUrl":"https://aoctrl.com/api/mcp/products/E2EX3D28T2MOMS","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2E NEXT series, Inductive Sensor, NC, M8, Flush Mount, 3 mm, 350 Hz, 10–30 VDC, 100 mA, Cable 2 m.","salesMarkdown":"The Omron E2EX3D28T2MOMS is a current-production M8 inductive proximity sensor from the E2E NEXT series. It detects ferrous targets at 3 mm range when flush-mounted in metal, and switches a normally-closed (NC) load at up to 350 Hz. The 2 m flying lead comes pre-wired, saving a connector. Rated 10–30 VDC, 100 mA max load current, IP67 — ready for coolant splash exposure on a machine tool. The NC output opens when a target is present. Verify load within 100 mA and supply 10–30 VDC. ## How it compares to similar sensors your BOM might call out The M12 peer E2EX7D2122MOMS is not a cable-swap replacement. It has a 21 mm hex body vs this unit's 15 mm, and a longer 47 mm can, so it won't drop into the same M8 clearance hole or bracket pocket. It also senses 7 mm instead of 3 mm, which changes target standoff. If the panel is already drilled for M8, you'd need a new sensor holder and possibly a different target cam. The output polarity is the same NC, but the mechanical delta rules out a straight substitution. For compliance documentation, the E2E NEXT series typically carries RoHS and REACH declarations from Omron. If your incoming quality team needs the specific declaration of conformity or a CE certificate, request it with your RFQ — the sensor itself is marked with the relevant approvals per Omron's standard label. ## What to watch during installation The M8 threaded barrel is flush-mount rated, so you can thread it into a tapped hole in steel without derating the sensing distance — that 3 mm is real against an iron target, not a derated figure. Torque to about 10 N·m; the brass housing will strip if over-tightened. Keep the 2 m cable clear of high-frequency inverter bundles; the sensor itself switches at 350 Hz, but the cable isn't shielded, so route it separately from VFD output lines. At 15 mm wide, it fits in a standard M8 clamp. If you're populating a row of sensors, center-to-center spacing should be at least 30 mm to avoid mutual interference when flush-mounted. The IP67 seal is good for washdown but the cable entry should be pointed downward to avoid water pooling at the gland.","metaTitle":"Omron E2EX3D28T2MOMS Inductive Sensor, NC, M8 Flush, 3 mm","metaDescription":"Current-production Omron E2E NEXT inductive sensor. M8 flush-mount, NC output, 3 mm sensing distance, 15x15x33.4 mm brass housing with 2 m cable. IP67, 10–30 VDC, 100 mA load.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"Width":"15 mm","title":"E2EX3D28T2MOMS","Height":"15 mm","Length":"33.4 mm","Series":"E2E NEXT","description":"Inductive Sensor Break Contact (NC) 350Hz 30V 100mA 3mm IP67 Cable Connection, 2 m E2E NEXT","Load Current":"100 mA","Mounting Type":"Flush Mount","lifecycle_stage":"current","Housing Material":"Brass","Termination Type":"Cable Connection, 2 m","Construction Form":"M8","Protection Rating":"IP67","Current Consumption":"100 mA","Switching Frequency":"350 Hz","Sensing Distance Max.":"3 mm","Operating Voltage Max.":"30 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"70 °C","Operating Temperature Min.":"-25 °C","Inductive Sensor Output Type":"Break Contact (NC)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$80.55","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/62e3db9c5b6b2c91ed67d88ad6787fcf.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Will E2EX3D28T2MOMS drop into a panel that was specified around E2EX7D2122MOMS without rewiring?","answer":"No. The M12 peer E2EX7D2122MOMS has a 21 mm body vs this unit's 15 mm, and a longer 47 mm can. It won't physically fit an M8 clearance hole or bracket pocket without mechanical changes. The electrical output is the same NC, but the mechanical delta rules out a straight substitution."},{"question":"What is E2EX3D28T2MOMS's listed width (15 mm) on this component line?","answer":"The sensor measures 15 mm wide (width) by 15 mm tall by 33.4 mm long (excluding cable). That's the M8 threaded barrel size."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2EX3D28T2MOMS","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2EX3D28T2MOMS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}