{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2EX50MB1TL30M1OMS","brand":"Omron","brandSlug":"omron","productSlug":"E2EX50MB1TL30M1OMS","canonicalUrl":"https://aoctrl.com/omron/E2EX50MB1TL30M1OMS","factsUrl":"https://aoctrl.com/api/mcp/products/E2EX50MB1TL30M1OMS","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2E series inductive sensor, M30 non-flush, PNP, 50 mm sensing, M12 connector, IP67.","salesMarkdown":"It delivers a 50 mm sensing distance — the longest available in the M30 E2E line for non-flush variants — and switches at up to 100 Hz. Output is PNP, normally open, over a 10–30 V supply range. The M12 connector saves panel wiring time compared to pigtail versions. Housing is brass nickel-plated, rated IP67 for washdown zones. ## Where it fits and where it doesn't Compared to the flush-mount E2EX22B1T30M1OMS (22 mm sensing, 200 Hz), the 50 mm non-flush version nearly doubles the sensing range but requires an unshielded installation — the target must approach from one side only, and metal around the barrel steals range. The 95 mm barrel length (vs. 58 mm on the flush peer) places the nut further back on the bracket. Same M30 thread, same M12 connector, same voltage and temperature range. If the original spec called for a flush sensor, the non-flush will not drop in without reworking the mounting and re-evaluating the gap; if the panel has clearance, the extra reach simplifies detection through thin non-metallic walls or over longer distances.","metaTitle":"Omron E2EX50MB1TL30M1OMS E2E Inductive Sensor, 50mm Non-Flus","metaDescription":"Omron E2EX50MB1TL30M1OMS inductive sensor, 50 mm sensing, non-flush mount, M12 connector, IP67. 10–30 V PNP output. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"title":"E2EX50MB1TL30M1OMS","Length":"95 mm","Series":"E2E","description":"Inductive Sensor PNP 100Hz 30V 16mA 50mm Connector, M12 IP67 E2E","Load Current":"50 mA","Mounting Type":"Non Flush Mount","lifecycle_stage":"current","Housing Material":"Brass Nickel Plated","Termination Type":"Connector, M12","Construction Form":"M30","Protection Rating":"IP67","Current Consumption":"16 mA","Switching Frequency":"100 Hz","Sensing Distance Max.":"50 mm","Operating Voltage Max.":"30 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"70 °C","Operating Temperature Min.":"-25 °C","Inductive Sensor Output Type":"PNP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$118.57","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f0bc6e1510aa5b285616d1ed6ce3556e.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the sensing distance of E2EX50MB1TL30M1OMS?","answer":"The sensing distance is 50 mm, non-flush mount."},{"question":"Will E2EX50MB1TL30M1OMS drop into a panel originally using E2EX22B1T30M1OMS?","answer":"No. The non-flush mounting requires clearance around the sensing face; the flush-mount peer sits closer to metal. Also the barrel is 95 mm long vs. 58 mm, so the nut position differs. Wiring is identical (M12, PNP), but the mounting hole pattern and sensor head location must be re-evaluated."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2EX50MB1TL30M1OMS","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2EX50MB1TL30M1OMS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}