{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E2EX7D2122MOMS","brand":"Omron","brandSlug":"omron","productSlug":"E2EX7D2122MOMS","canonicalUrl":"https://aoctrl.com/omron/E2EX7D2122MOMS","factsUrl":"https://aoctrl.com/api/mcp/products/E2EX7D2122MOMS","rawCanonicalId":null},"summary":{"shortDescription":"Omron E2E-X series, M12 inductive proximity sensor, 7 mm sensing distance, normally closed (NC) output, flush mount, 100 mA load, 10–30 VDC, 2 m cable, IP67/IP67G/IP69K.","salesMarkdown":"## M12 NC sensor with 7 mm reach The Omron E2EX7D2122MOMS is a flush-mount M12 inductive sensor that detects ferrous targets at 7 mm — unusually long for a shielded housing. Its normally closed output (NC) is the less common variant, used where a broken wire or loss of power must trigger a safety stop. Rated IP67 / IP67G / IP69K, the nickel-plated brass barrel and 2 m cable survive high-pressure washdown cycles. Switching frequency hits 350 Hz, fast enough for link-conveyor timing or rotary-index checking. ## Mounting & wiring check Flush-mount install: no derating for metal surroundings; 21 mm barrel fits standard M12 clamp. Cable is 2 m, PVC, pre-wired. The NC output is a two-wire DC configuration: verify that your load expects a closed-to-open transition on target presence, not open-to-closed. Supply must be 10–30 VDC; the sensor draws 100 mA at most. The IP69K rating holds only if the cable gland and face are free of damage — inspect the sealing surface before dropping into a washdown zone.","metaTitle":"Omron E2EX7D2122MOMS Inductive Sensor, M12, NC, 7mm","metaDescription":"Omron E2EX7D2122MOMS M12 flush-mount inductive sensor: normally closed, 7mm range, 350Hz, IP69K, 2m cable. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"Width":"21 mm","title":"E2EX7D2122MOMS","Height":"21 mm","Length":"47 mm","Series":"E2E-X","description":"Inductive Sensor Break Contact (NC) 350Hz 30V 7mm Cable, 2 m IP67 / IP67G / IP69K E2E-X","Load Current":"100 mA","Mounting Type":"Flush Mount","lifecycle_stage":"current","Housing Material":"Nickel Plated Brass","Termination Type":"Cable, 2 m","Construction Form":"M12","Protection Rating":"IP67;IP67G;IP69K","Repeat Accuracy (%)":"10 %","Switching Frequency":"350 Hz","Sensing Distance Max.":"7 mm","Operating Voltage Max.":"30 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"70 °C","Operating Temperature Min.":"-25 °C","Inductive Sensor Output Type":"Break Contact (NC)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a27541a72da727245151b50805b7c3cf.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Will the E2EX5MY12MOMS drop into a panel wired for this sensor?","answer":"Physically yes — same M12 thread and mounting dimensions. But the output logic is opposite: this sensor is normally closed (NC); the peer is normally open (NO). You would need to reverse the wiring or invert the PLC input. Also, the peer requires a wider supply range (20–264 V) and has a different sensing distance (5 mm non-flush). For a pure NC DC circuit, only this sensor fits."},{"question":"What is the sensing range at the operating voltage?","answer":"Rated 7 mm for a mild steel target at 10–30 VDC. Repeat accuracy is ±10%, and switching frequency is 350 Hz. No linearity curve required for a proximity sensor."},{"question":"What protection ratings does this sensor carry?","answer":"Three ratings: IP67 (dust and immersion), IP67G (with protection against oil), and IP69K (high-pressure, high-temperature washdown). The housing is nickel-plated brass; the cable entry is the only potential ingress point if damaged."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E2EX7D2122MOMS","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E2EX7D2122MOMS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}