{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E3FBDP122MOMI","brand":"Omron","brandSlug":"omron","productSlug":"E3FBDP122MOMI","canonicalUrl":"https://aoctrl.com/omron/E3FBDP122MOMI","factsUrl":"https://aoctrl.com/api/mcp/products/E3FBDP122MOMI","rawCanonicalId":null},"summary":{"shortDescription":"Omron E3FB Series, Diffuse Reflective Photoelectric Sensor, PNP, 300 mm range, 500 µs response, 100 mA, 10–30 VDC, cable, IP69K/IP67, Red LED.","salesMarkdown":"## What this sensor gives you The Omron E3FBDP122MOMI is a diffuse reflective photoelectric sensor with a 300 mm sensing range and PNP output. It runs on 10–30 VDC, sinks or sources 100 mA, and switches in 500 µs. The light source is a Red LED, and you can select Light-ON or Dark-ON operation. The housing is rated IP69K and IP67, so it survives high-pressure washdown and full immersion. That makes it a candidate for food processing lines, car washes, and wastewater lift stations where hose-down is routine. If you’ve been specifying E3FBDP22OMI (M12 connector, 48 mm long) and are considering this cable-terminated E3FBDP122MOMI, the key differences are termination and length. The E3FBDP22OMI uses a 4-pin M12 connector and is 4 mm longer. Sensing performance is identical: both are PNP, 300 mm range, 500 µs response, same voltage/current and IP rating. Swapping from the connector variant to the cable variant changes termination: cable needs a gland or splice; connector needs a mating cordset. The cable version is 4 mm shorter (44 mm vs 48 mm), but width remains 18 mm. Mount the sensor so the lens stays clear of build-up — the diffuse reflective design means no reflector, but the emitter and receiver share the same window. The 18 mm width fits standard brackets, the IP69K housing requires a proper gland seal, and the operating temperature is -25 to 55 °C.","metaTitle":"Omron E3FBDP122MOMI PNP Diffuse Photoelectric, 300mm, IP69K","metaDescription":"Omron E3FBDP122MOMI PNP diffuse reflective sensor, 300mm sensing range, 500us response, 100mA load, 10-30V supply, cable termination, IP69K/IP67. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Photoelectric Sensors"],"specifications":{"Width":"18 mm","title":"E3FBDP122MOMI","Length":"44 mm","Series":"E3FB","Light Type":"Red LED","Sensor Type":"Diffuse Reflective Sensor","description":"Photoelectric Sensor PNP 300mm 500us 30V 100mA Red LED Cable IP69K / IP67 E3FB","Load Current":"100 mA","Response Time":"500 us","Switching Type":"Light-ON / Dark-ON","lifecycle_stage":"current","Termination Type":"Cable","Protection Rating":"IP69K;IP67","Sensing Distance Max.":"300 mm","Operating Voltage Max.":"30 V","Operating Voltage Min.":"10 V","Operating Temperature Max.":"55 °C","Operating Temperature Min.":"-25 °C","Optical Sensor Output Type":"PNP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$115.77","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9ac02ed834a8958ecf762a03719bec74.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can the E3FBDP122MOMI directly replace the E3FBDP22OMI without rewiring?","answer":"No — the termination differs. The cable version requires a gland or splice; the connector version needs a mating cordset. The sensors are electrically identical but not a mechanical drop-in for each other's wiring setup."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E3FBDP122MOMI","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E3FBDP122MOMI when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}