{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"E3ZT86DOMI","brand":"Omron","brandSlug":"omron","productSlug":"E3ZT86DOMI","canonicalUrl":"https://aoctrl.com/omron/E3ZT86DOMI","factsUrl":"https://aoctrl.com/api/mcp/products/E3ZT86DOMI","rawCanonicalId":null},"summary":{"shortDescription":"Omron E3Z-series infrared through-beam photoelectric sensor, PNP dark-on output, 15 m sensing range, 12–24 V supply, M8 4-pin connector, IP67 housing.","salesMarkdown":"## Device profile The Omron E3ZT86DOMI is a member of the E3Z photoelectric family and presents as a through-beam pair using an infrared LED emitter, which is the configuration that lands on the BOM when the target is opaque and the beam needs to clear a long cross-line without depending on a retroreflector. Sensing distance tops out at 15 m, so it suits conveyor-bay width, pallet-stack inspection, and door-area guarding where a reflex unit would lose margin in shiny environments. The datasheet description line places it as Photoelectric Sensor PNP 15 m 1 ms 24 V 100 mA LED, Infrared, Connector M8 4-Pin, IP67 — the headline numbers a panel-builder specifies to. ## Electrical envelope and output The supply rail runs from 12 V to 24 V, with 100 mA available load current at the PNP output and a stated response time of 1 ms — fast enough for indexing conveyors and small parts counting without chasing tails. The output is PNP (sourcing) and the unit ships on a 4-pin M8 connector, which is the standard drop for a one-cable sensor on a remote I/O block. Light-ON / Dark-ON is selectable, so the same part covers a beam-made signal at the PLC input on either polarity of logic. ## Mechanical and environment envelope The housing footprint is 10.8 mm wide by 20 mm tall by 31 mm long, which is the E3Z compact body and shares the same mounting centres and bracket family as the rest of the series. IP67 seals the front face for washdown cells and outdoor cabinets, and the operating window stretches from -40 °C to 55 °C — cold-room stores, freezer lines, and unconditioned outdoor panels all fit inside one envelope. Termination is the pre-wired M8 pigtail variant, so cordset selection is on the panel BOM, not on the sensor.","metaTitle":"Omron E3ZT86DOMI Through-Beam Sensor, PNP, 15 m","metaDescription":"Omron E3ZT86DOMI E3Z-series infrared through-beam sensor, PNP output, 15 m range, 1 ms response, M8 4-pin connector, IP67, 12–24 V.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Photoelectric Sensors"],"specifications":{"Width":"10.8 mm","title":"E3ZT86DOMI","Height":"20 mm","Length":"31 mm","Series":"E3Z","Light Type":"LED, Infrared","Sensor Type":"Through Beam","description":"Photoelectric Sensor PNP 15m 1ms 24V 100mA LED, Infrared Connector, M8, 4-Pin IP67 E3Z","Load Current":"100 mA","Response Time":"1 ms","Switching Type":"Light-ON / Dark-ON","lifecycle_stage":"current","Termination Type":"Connector, M8, 4-Pin","Protection Rating":"IP67","Sensing Distance Max.":"15 m","Operating Voltage Max.":"24 V","Operating Voltage Min.":"12 V","Operating Temperature Max.":"55 °C","Operating Temperature Min.":"-40 °C","Optical Sensor Output Type":"PNP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$99.05 – $105.55","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b972512d256942bdf44d601cef742048.pdf","sourceUrl":null},"ai":{"faq":[{"question":"When sourcing E3ZT86DOMI, what's the closest functional second-source — E3ZT86LOMI?","answer":"E3ZT86LOMI is the closest E3Z sibling and matches the 15 m range, 1 ms response, body, and connector — but the output is NPN instead of PNP, so it is a bracket-level second source only when the PLC input can read a sinking device. If a red-LED variant in the same PNP form is acceptable, the E3ZT86ADOMI drops in with a shorter 10 m range."},{"question":"Will E3ZT86DOMI drop into a panel that was specified around E3ZT86LOMI without rewiring?","answer":"Mechanically yes — same E3Z body, same bracket, same M8 4-pin connector. Electrically no, because E3ZT86LOMI is NPN (sinking) while E3ZT86DOMI is PNP (sourcing); swap the input wiring to match the PLC card's expectation before energising."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/E3ZT86DOMI","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/E3ZT86DOMI when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}