{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW13267","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW13267","canonicalUrl":"https://aoctrl.com/schneider/ENW13267","factsUrl":"https://aoctrl.com/api/mcp/products/ENW13267","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, ENW13267, 3 poles, 1000 A AC-23A, 440 V AC, drawout mounting, IP30.","salesMarkdown":"The Schneider Electric ENW13267 is a 3-pole switch disconnector from the EasyPact NW range, rated 1000 A in AC-23A utilisation category at 440 V AC. That AC-23A rating means it handles switching of motor loads and other highly inductive circuits — not just resistive — so it's suited for distribution and isolation duty where you need to make and break under load. The drawout mounting lets you rack the unit out for maintenance without disturbing the main bus connections, a common requirement in switchgear lineups. ## Withstand and making capacity Rated short-time withstand current (Icw) is 50 kA for 1 second at 220–440 V, and the rated short-circuit making capacity (Icm) is 75 kA at the same voltage range. These numbers tell you the switch can survive a fault long enough for upstream protection to clear, and can close onto an existing fault without welding contacts. The 12 kV rated impulse withstand voltage (Uimp) confirms insulation coordination for 1000 V systems per IEC 60947-3. Drawout mounting on a rail base plate. Connection pitch is 70 mm without spreader. Rear connection, vertical or horizontal orientation. The 277 mm depth, 288 mm width, and 322 mm height fit standard switchgear cubicle compartments. IP30 finger protection is adequate for enclosed installation.","metaTitle":"Schneider Electric ENW13267 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW13267 EasyPact NW switch disconnector, 3 poles, 1000 A AC-23A, 440 V AC. Drawout mount, IEC 60947-3. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"277 mm","Width":"288 mm","Height":"322 mm","Current":"AC-23 A: 1000 A AC 50/60 Hz 440 V","Voltage":"440 V AC 50/60 Hz conforming to IEC 60947-3","IP Rating":"IP30","Application":"Distribution","Product Status":"Active","Terminal Pitch":"70 mm without spreader","Pollution Degree":"class 3","Temp Storage Max":"85 °C","Temp Storage Min":"-40 °C","Insulation Voltage Ui":"1000 V AC 50/60 Hz conforming to IEC 60947-3","Temp Operating Max":"70 °C","Temp Operating Min":"-5 °C","Temperature Storage":"-40...85 °C","Utilization Category":"AC-23 A","Mechanical Life Cycles":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Main Product Or Component Type":"Switch disconnector","Ambient Air Temperature Operation":"-5...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/11db37e7ee9e2b9652ce821b06f3d04a.pdf","sourceUrl":"https://www.se.com/eg/en/product/ENW13267/switch-disconnector-easypact-nw-3-poles-1000a-ac-withdrawable/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ENW13267/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW13267","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW13267 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}