{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW13280","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW13280","canonicalUrl":"https://aoctrl.com/schneider/ENW13280","factsUrl":"https://aoctrl.com/api/mcp/products/ENW13280","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW switch disconnector, 3 poles, 1000 A AC-23A, drawout mounting, 358 x 322 x 277 mm.","salesMarkdown":"It is built to IEC 60947-3 and carries a suitability-for-isolation mark, meaning it can safely break a circuit and keep it visibly open for lockout/tagout. Its headline rating is 1000 A in utilisation category AC-23A at 440 V AC — that is the motor-switching and mixed-load curve. For a cement plant or heavy panel, this is the number that decides whether the switch holds on a loaded conveyor start or a crusher inrush. ## Fault handling and duty cycle Rated short-time withstand current (Icw) is 50 kA for 1 second at 220–440 V, and the rated short-circuit making capacity (Icm) is 75 kA at the same voltage range. These are the values a site electrical engineer needs for selectivity studies and SCCR coordination downstream of a transformer or generator. Electrical durability in AC-23A is 5000 cycles without maintenance; mechanical durability is 20000 cycles with maintenance, 10000 without. Drawout mounting on a rail base plate — the switch pulls out for inspection or replacement without disturbing the main bus connections. Connection pitch is 70 mm without a spreader, and connections are rear-located, vertical or horizontal. IP30 protection means it is sealed against tools and wires over 2.5 mm diameter but not against dust ingress. In a cement plant environment, that means it belongs in a clean-ish MCC or panel room, not out on the raw-mill floor. Impulse withstand voltage is 12 kV.","metaTitle":"Schneider Electric ENW13280 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW13280 EasyPact NW switch disconnector. 1000 A AC-23A, 3 poles, drawout mount. Rated for isolation per IEC 60947-3. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"277 mm","Width":"358 mm","Height":"322 mm","Current":"AC-23 A: 1000 A AC 50/60 Hz 440 V","Voltage":"440 V AC 50/60 Hz conforming to IEC 60947-3","IP Rating":"IP30","Application":"Distribution","Product Status":"Active","Terminal Pitch":"70 mm without spreader","Pollution Degree":"class 3","Temp Storage Max":"85 °C","Temp Storage Min":"-40 °C","Insulation Voltage Ui":"1000 V AC 50/60 Hz conforming to IEC 60947-3","Temp Operating Max":"70 °C","Temp Operating Min":"-5 °C","Temperature Storage":"-40...85 °C without control unit","Utilization Category":"AC-23 A","Mechanical Life Cycles":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Main Product Or Component Type":"Switch disconnector","Ambient Air Temperature Operation":"-5...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2cffae51435bef80db50a7bd21e2ff51.pdf","sourceUrl":"https://www.se.com/ae/en/product/ENW13280/switch-disconnector-easypact-nw-4-poles-1000a-withdrawable/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ENW13280/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW13280","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW13280 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}