{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW13282","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW13282","canonicalUrl":"https://aoctrl.com/schneider/ENW13282","factsUrl":"https://aoctrl.com/api/mcp/products/ENW13282","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, 3P, 1600 A AC-23A, drawout, IEC 60947-3.","salesMarkdown":"The ENW13282 is a 3-pole switch disconnector from the Schneider Electric EasyPact NW range, rated for 1600 A in AC-23A duty at 440 V AC. The drawout mounting lets you rack the unit out for maintenance or replacement without disturbing the main bus connections — a real time-saver in switchgear where uptime matters. The headline number is 1600 A at 440 V in AC-23A — that's the motor-switching rating, not a resistive-heater rating. If your load is a 1600 A motor starter feeder or a distribution main with motor-heavy downstream, this is the right curve. The short-time withstand (Icw) is 50 kA for 1 second at 220–440 V, and the making capacity (Icm) is 75 kA at the same voltage range. That tells you the switch can survive a bolted fault and close onto a short without welding contacts — critical for selectivity in a distribution panel. IP30 protection on the switch itself is typical for enclosed switchgear — the enclosure provides the higher IP.","metaTitle":"Schneider Electric ENW13282 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW13282 EasyPact NW switch disconnector, 1600 A AC-23A, 3P, drawout, IEC 60947-3. Active production. Sourced to order. Request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"277 mm","Range":"EasyPact","Width":"358 mm","title":"ENW13282","Height":"322 mm","Standards":"IEC 60947-3","description":"switch disconnector, EasyPact NW, 4 Poles, 1600A, withdrawable","Network type":"AC","Mounting mode":"Drawout","lifecycle_stage":"current","Connection pitch":"70 mm without spreader","Mounting support":"Rail Base plate","Pollution degree":"3 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW16CA","Network frequency":"50/60 Hz","Poles description":"3P","Device application":"Distribution","Connection position":"Vertical Horizontal","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 5000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Breaking capacity code":"CA","Location of connection":"Rear","IP degree of protection":"IP30","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 1600 A AC 50/60 Hz 440 V","[Ue] rated operational voltage":"440 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"50 kA during 1 s conforming to IEC 60947-3 at 220...440 V","[Icm] rated short-circuit making capacity":"75 kA 220...440 V AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c43014ac85ab7badce835a7f62334386.pdf","sourceUrl":"https://www.se.com/eg/en/product/ENW13282/switch-disconnector-easypact-nw-4-poles-1600a-withdrawable/"},"ai":{"faq":[{"question":"Where can I buy ENW13282 and how is it quoted?","answer":"The ENW13282 is sourced through independent distribution and quoted to order against an RFQ. Availability and current pricing are confirmed at quote time."},{"question":"What is ENW13282's rated operational current in AC-23A?","answer":"The ENW13282 is rated 1600 A in AC-23A at 440 V AC, 50/60 Hz, per IEC 60947-3."},{"question":"What compliance documentation does Schneider Electric provide for ENW13282?","answer":"The ENW13282 is designed to IEC 60947-3 and carries a suitability-for-isolation declaration per that standard. For RoHS, REACH, or UL documentation, contact your Schneider Electric representative or distributor — those certificates are not included in the basic listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW13282","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW13282 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}