{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW13284","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW13284","canonicalUrl":"https://aoctrl.com/schneider/ENW13284","factsUrl":"https://aoctrl.com/api/mcp/products/ENW13284","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, ENW13284, 800 A, 3-pole, fixed mounting, AC-23A, 440 V.","salesMarkdown":"## What the 800 A AC-23A rating means for your distribution board The Schneider Electric ENW13284 is a 3-pole switch disconnector from the EasyPact NW range, rated 800 A in AC-23A utilisation category at 440 V AC. The 12 kV impulse rating means it can survive transient overvoltages common in industrial distribution without flashover — relevant if your panel feeds long cable runs or sits near VFDs that generate switching spikes. Short-time withstand current (Icw) is 50 kA for 1 second at 220–440 V, and the rated short-circuit making capacity (Icm) is 75 kA at the same voltage range. For selectivity coordination, the 50 kA Icw tells you this switch can hold in during a downstream fault long enough for the upstream breaker to clear — it won't weld or blow open on a through-fault within that window. Mounts fixed to a rail base plate — not a standard DIN rail, but a dedicated backplate that bolts into the enclosure. Dimensions are 346 mm wide by 301 mm high by 196 mm deep, so plan for a cabinet depth of at least 250 mm to allow rear cable access and bending radius. Connection is rear-entry only, vertical or horizontal orientation, with a 70 mm phase-to-phase pitch without spreader. That pitch matches standard busbar systems in 800 A switchgear — no adapter needed if your distribution uses 70 mm centres. IP30 protection means it's not sealed against water ingress — suitable for indoor switchboards only, not washdown or outdoor locations.","metaTitle":"Schneider Electric ENW13284 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW13284 switch disconnector, EasyPact NW, 800 A rated operational current in AC-23A at 440 V. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"196 mm","Range":"EasyPact","Width":"346 mm","title":"ENW13284","Height":"301 mm","Standards":"IEC 60947-3","description":"switch disconnector, EasyPact NW, 800A, 4 Poles, Fixed","Network type":"AC","Mounting mode":"Fixed","lifecycle_stage":"current","Connection pitch":"70 mm without spreader","Mounting support":"Rail Base plate","Pollution degree":"3 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW08CA","Network frequency":"50/60 Hz","Poles description":"3P","Device application":"Distribution","Connection position":"Vertical Horizontal","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 5000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Breaking capacity code":"CA","Location of connection":"Rear","IP degree of protection":"IP30","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 800 A AC 50/60 Hz 440 V","[Ue] rated operational voltage":"440 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"50 kA during 1 s conforming to IEC 60947-3 at 220...440 V","[Icm] rated short-circuit making capacity":"75 kA 220...440 V AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f648d522c04e5e2fc30785e9aeac8051.pdf","sourceUrl":"https://www.se.com/in/en/product/ENW13284/switch-disconnector-easypact-nw-800a-4-poles-fixed/"},"ai":{"faq":[{"question":"Where can I buy ENW13284 and how do I get a price?","answer":"The ENW13284 is sourced through independent distribution channels. Submit an RFQ for current pricing and availability — both are confirmed at quote time."},{"question":"What is ENW13284's rated operational current and utilisation category?","answer":"The ENW13284 is rated 800 A in AC-23A utilisation category at 440 V AC, 50/60 Hz. AC-23A covers switching of motor loads and other highly inductive loads."},{"question":"What compliance documentation does this brand provide for ENW13284?","answer":"The ENW13284 is designed and tested to IEC 60947-3 for switch-disconnectors. It carries a rated insulation voltage of 1000 V AC, rated impulse withstand voltage of 12 kV, and is suitable for isolation per that standard. Specific RoHS, REACH, or UL documentation should be confirmed at time of order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW13284","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW13284 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}