{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW13287","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW13287","canonicalUrl":"https://aoctrl.com/schneider/ENW13287","factsUrl":"https://aoctrl.com/api/mcp/products/ENW13287","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, ENW13287, 1600 A AC-23A, 3 poles, fixed mount, 1000 V insulation voltage.","salesMarkdown":"## Switch disconnector for distribution, 1600 A AC-23A The Schneider Electric ENW13287 is a fixed-mount switch disconnector from the EasyPact NW range, rated 1600 A in AC-23A duty at 440 V AC. Three-pole configuration (3P), rear-connected, with a vertical or horizontal connection orientation. The 70 mm connection pitch without spreader matches standard busbar layouts in distribution switchboards. Rated insulation voltage 1000 V AC and impulse withstand 12 kV give it headroom for 690 V systems even though the operational voltage here is 440 V. ## Short-circuit performance and isolation Rated short-time withstand current (Icw) is 50 kA for 1 s at 220–440 V, and the rated short-circuit making capacity (Icm) is 75 kA at the same voltage. These numbers govern selectivity coordination with upstream protection — the switch must pass fault current for the clearing time of the upstream breaker without welding or degrading. Suitable for isolation per IEC 60947-3, with a visible contact position indicator. That means it can serve as a load-break disconnect with a positive indication of open contacts, satisfying the safety isolation requirement for downstream maintenance. IP30 protection means it's not intended for washdown environments — install inside a switchboard or enclosure rated for the ambient conditions. Mechanical durability: 20,000 cycles with maintenance, 10,000 without. Electrical durability for AC-23A duty at 440 V is 5,000 cycles without maintenance. These are the life-cycle numbers for planning spares and maintenance intervals on a high-cycle distribution switch. Mounts on a rail base plate (fixed mounting support). Dimensions: 346 mm wide, 301 mm high, 196 mm deep — confirm panel cutout and door clearance before specifying.","metaTitle":"Schneider Electric ENW13287 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW13287 EasyPact NW switch disconnector, 1600A rated operational current (AC-23A), 3 poles, fixed mount, IEC 60947-3. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"196 mm","Range":"EasyPact","Width":"346 mm","title":"ENW13287","Height":"301 mm","Standards":"IEC 60947-3","description":"switch disconnector, EasyPact NW, 1600A, 4 Poles, Fixed","Network type":"AC","Mounting mode":"Fixed","lifecycle_stage":"current","Connection pitch":"70 mm without spreader","Mounting support":"Rail Base plate","Pollution degree":"3 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW16CA","Network frequency":"50/60 Hz","Poles description":"3P","Device application":"Distribution","Connection position":"Vertical Horizontal","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 5000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Breaking capacity code":"CA","Location of connection":"Rear","IP degree of protection":"IP30","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 1600 A AC 50/60 Hz 440 V","[Ue] rated operational voltage":"440 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"50 kA during 1 s conforming to IEC 60947-3 at 220...440 V","[Icm] rated short-circuit making capacity":"75 kA 220...440 V AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5caae341be8ecdf87bdf403034313688.pdf","sourceUrl":"https://www.se.com/in/en/product/ENW13287/switch-disconnector-easypact-nw-1600a-4-poles-fixed/"},"ai":{"faq":[{"question":"What is the rated operational current of ENW13287?","answer":"The ENW13287 is rated 1600 A in AC-23A utilisation category at 440 V AC, 50/60 Hz."},{"question":"Where can I buy ENW13287 and get pricing?","answer":"The ENW13287 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time."},{"question":"What standards does ENW13287 comply with?","answer":"The ENW13287 complies with IEC 60947-3 for switch-disconnectors and IEC 60664-1 for insulation coordination (pollution degree 3). It is suitable for isolation per IEC 60947-3."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW13287","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW13287 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}