{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24174","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24174","canonicalUrl":"https://aoctrl.com/schneider/ENW24174","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24174","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, ENW10N, 1000A AC-23A, 3 poles, fixed mount, rear connection.","salesMarkdown":"The Schneider Electric ENW24174 is a fixed-mount switch disconnector from the EasyPact NW range, rated for 1000 A in AC-23A utilisation category at 690 V AC 50/60 Hz. It is a 3-pole device with rear connection, designed for distribution applications where load-break switching and visible isolation are required. The AC-23A rating means it handles occasional switching of motor loads or other highly inductive circuits — not just resistive loads — so it suits mixed-load panels where a general-purpose disconnect is needed rather than a dedicated motor-circuit switch. Rated operational current (Ie) is 1000 A in AC-23A at 690 V. Rated insulation voltage (Ui) is 1000 V AC, and rated impulse withstand (Uimp) is 12 kV per IEC 60947-3. These tell you the switch is designed for 690 V systems with adequate clearance for surge events up to 12 kV — typical for industrial distribution where the supply transformer and upstream protection set the coordination level. Short-time withstand (Icw) is 50 kA for 1 second or 25 kA for 3 seconds. Short-circuit making capacity (Icm) is 105 kA peak at 50/60 Hz. These numbers define the switch's ability to survive a fault and close onto a short circuit — critical for selectivity studies and SCCR compliance in the panel schedule. Pollution degree 4 per IEC 60664-1 means the switch is rated for harsh environments where conductive pollution (dust, moisture, carbon deposits) is present — typical of heavy industrial or outdoor enclosures. Fixed mounting on a base plate. Dimensions: 422 mm wide, 352 mm high, 297 mm deep. Connection pitch is 115 mm without spreader. Rear connection position, horizontal or vertical orientation.","metaTitle":"ENW24174 EasyPact NW Switch Disconnector, 1000A, 3P, Fixed","metaDescription":"Schneider Electric ENW24174 EasyPact NW switch disconnector, 1000A AC-23A, 690V, 3-pole, fixed mount. Active production, sourced to order. IEC 60947-3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"297 mm","Range":"EasyPact","Width":"422 mm","title":"ENW24174","Height":"352 mm","Standards":"IEC 60947-3","Rated duty":"Continuous","description":"switch disconnector, EasyPact NW, 1000A, N, 3 Poles, fixed","Control type":"Push-button","Network type":"AC","Mounting mode":"Fixed","lifecycle_stage":"current","Connection pitch":"115 mm without spreader","Mounting support":"Base plate","Pollution degree":"4 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW10N","Network frequency":"50/60 Hz","Poles description":"3P","Device application":"Distribution","Connection position":"Horizontal Vertical","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 6000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 4000 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Location of connection":"Rear","IP degree of protection":"IP40","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 1000 A AC 50/60 Hz 690 V","[Ue] rated operational voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"50 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 25 kA during 3 s conforming to IEC 60947-3 at -5...70 °C","[Icm] rated short-circuit making capacity":"105 kA AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bf74477ff0b02c1bfb48e48e8bbf5c89.pdf","sourceUrl":"https://www.se.com/ae/en/product/ENW24174/switch-disconnector-easypact-nw-1000a-n-3-poles-fixed/"},"ai":{"faq":[{"question":"Where can I buy ENW24174 and get a price?","answer":"The ENW24174 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at the time of quote."},{"question":"What is ENW24174's rated operational current?","answer":"The rated operational current (Ie) is 1000 A in AC-23A utilisation category at 690 V AC 50/60 Hz."},{"question":"What compliance standards does ENW24174 meet?","answer":"The ENW24174 is designed and tested to IEC 60947-3, with pollution degree 4 per IEC 60664-1. It is suitable for isolation and carries a 12 kV rated impulse withstand voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24174","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24174 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}