{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24214","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24214","canonicalUrl":"https://aoctrl.com/schneider/ENW24214","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24214","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW series, ENW24214 switch disconnector, 1000 A AC-23A, 690 V, 4 poles, drawout mounting, IP40.","salesMarkdown":"The ENW24214 is a 1000 A switch disconnector from the Schneider Electric EasyPact NW range, built for distribution duty in industrial switchboards. Four poles, drawout chassis, rear-connected — this is the piece that isolates a feeder or a large motor circuit for maintenance, with a contact position indicator so you can see the gap from outside the panel. Rated 1000 A in AC-23A utilisation category at 690 V — that covers motor loads with occasional inrush, not just resistive heating. AC-23A is the heavy lifting category under IEC 60947-3: switching motors, transformers, and capacitive loads where the making and breaking current is higher than a plain disconnect. The 66 kA short-time withstand for 1 second and 143 kA making capacity tell you this thing can sit through a fault and close onto one without welding its contacts — critical for selectivity coordination downstream of a transformer. The IP40 enclosure keeps tools and fingers out but breathes; in a dirty environment the drawout cassette seals the arc chamber when racked in. Rated insulation voltage 1000 V and impulse withstand 12 kV give headroom for 690 V systems with decent surge exposure.","metaTitle":"ENW24214 EasyPact NW Switch Disconnector, 1000 A, 4P, Drawou","metaDescription":"ENW24214 EasyPact NW switch disconnector, 1000 A AC-23A, 690 V, 4 poles, drawout. IEC 60947-3 isolation rated. IP40, pollution degree 4. Available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"395 mm","Width":"556 mm","Height":"439 mm","Current":"AC-23 A: 1000 A AC 50/60 Hz 690 V","Voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","IP Rating":"IP40","Application":"Distribution","Control Type":"Push-button","Product Status":"Active","Terminal Pitch":"115 mm without spreader","Pollution Degree":"4 conforming to IEC 60664-1","Temp Storage Max":"85 °C","Temp Storage Min":"-40 °C","Insulation Voltage Ui":"1000 V AC 50/60 Hz conforming to IEC 60947-3","Temp Operating Max":"70 °C","Temp Operating Min":"-5 °C","Temperature Storage":"-40...85 °C without control unit","Utilization Category":"AC-23 A","Mechanical Life Cycles":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Main Product Or Component Type":"Switch disconnector","Ambient Air Temperature Operation":"-5...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/395a289b4d070f2c54defccb4a280532.pdf","sourceUrl":"https://www.se.com/ae/en/product/ENW24214/switch-disconnector-easypact-nw-1000a-h-4-poles-withdrawal/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ENW24214/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24214","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24214 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}