{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24222","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24222","canonicalUrl":"https://aoctrl.com/schneider/ENW24222","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24222","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, ENW24222, 1000 A AC-23A, 4 poles, fixed mount, IP40.","salesMarkdown":"## Switch disconnector for high-current distribution The Schneider Electric ENW24222 is a fixed-mount switch disconnector from the EasyPact NW range, rated for 1000 A in AC-23A duty at 690 V AC. That utilisation category covers switching of motor loads and other highly inductive circuits — the 1000 A figure is the operational current under those conditions, not a resistive-only rating. It carries a 66 kA short-time withstand (Icw) for 1 s and a 143 kA making capacity (Icm), so it can close onto a fault without welding contacts. Suitability for isolation per IEC 60947-3 is confirmed, meaning it provides a visible break and meets the clearance/creepage for a safety disconnect. ## Ratings that govern the application Rated insulation voltage (Ui) is 1000 V AC, and the impulse withstand (Uimp) is 12 kV — this switch can live in a 690 V panel and survive transient overvoltages typical of industrial distribution without tracking. Electrical durability under AC-23A is 6,000 cycles at 440 V and 4,000 cycles at 690 V — the switch is built for occasional load-break duty, not frequent motor starting. For higher cycle counts, a contactor-based solution would be appropriate. Fixed-mount on a base plate. Dimensions are 537 mm wide × 352 mm high × 297 mm deep — that's a substantial footprint; verify panel door cutout and swing clearance before layout. Rear connection with horizontal or vertical orientation. Neutral position is left. The 4-pole configuration (3 phases + switched neutral) is common for distribution boards where the neutral must be isolated.","metaTitle":"Schneider Electric ENW24222 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW24222 EasyPact NW switch disconnector, 1000 A rated operational current (AC-23A), 4 poles, fixed mount. Active production, sourced to order. IEC 60947-3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"297 mm","Range":"EasyPact","Width":"537 mm","title":"ENW24222","Height":"352 mm","Standards":"IEC 60947-3","Rated duty":"Continuous","description":"switch disconnector, EasyPact NW, 1000A, H, 4 Poles, fixed","Control type":"Push-button","Network type":"AC","Mounting mode":"Fixed","lifecycle_stage":"current","Connection pitch":"115 mm without spreader","Mounting support":"Base plate","Neutral position":"Left","Pollution degree":"4 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW10H","Network frequency":"50/60 Hz","Poles description":"4P","Device application":"Distribution","Connection position":"Horizontal Vertical","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 6000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 4000 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Breaking capacity code":"HA","Location of connection":"Rear","IP degree of protection":"IP40","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 1000 A AC 50/60 Hz 690 V","[Ue] rated operational voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"66 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 36 kA during 3 s conforming to IEC 60947-3 at -5...70 °C","[Icm] rated short-circuit making capacity":"143 kA AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/26dd6706a73d54693c7dea0ed932276d.pdf","sourceUrl":"https://www.se.com/ae/en/product/ENW24222/switch-disconnector-easypact-nw-1000a-h-4-poles-fixed/"},"ai":{"faq":[{"question":"What is the rated operational current of ENW24222?","answer":"The ENW24222 is rated 1000 A in AC-23A utilisation category at 690 V AC, 50/60 Hz."},{"question":"What standards does ENW24222 comply with?","answer":"It complies with IEC 60947-3 for switch-disconnectors and carries an isolation suitability marking per that standard. Pollution degree 4 per IEC 60664-1."},{"question":"Where can I buy ENW24222 and how is it quoted?","answer":"The ENW24222 is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24222","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24222 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}