{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24270","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24270","canonicalUrl":"https://aoctrl.com/schneider/ENW24270","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24270","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW switch disconnector, ENW24270, 1000 A AC-23A, 690 V AC, 4 poles, fixed mount, IP40.","salesMarkdown":"The ENW24270 is a 4-pole switch disconnector from Schneider Electric's EasyPact NW range, rated for 1000 A in AC-23A duty at 690 V AC — meaning it handles the high inrush of motor loads or mixed resistive-inductive circuits without derating. It's built for distribution panels where the disconnect needs to serve as a visible-break isolation point under load. ## Ratings that matter Short-circuit performance is substantial: 50 kA rated short-time withstand (Icw) for 1 second, and 105 kA peak making capacity (Icm). That means it can close onto a fault and hold through a downstream short without welding contacts or bursting the enclosure. Pollution degree 4 per IEC 60664-1 means the clearance and creepage paths are designed for conductive dust or condensation — common in switchgear rooms near cement plants, foundries, or outdoor substations. Fixed mount on a base plate, rear-connected. The neutral sits on the right side (viewed from the front). Connection pitch is 115 mm without a spreader, so busbar or cable lugs need to fit that spacing. Overall footprint: 537 mm wide, 352 mm high, 297 mm deep.","metaTitle":"Schneider Electric ENW24270 EasyPact NW Switch Disconnector,","metaDescription":"Active Schneider Electric ENW24270 EasyPact NW switch disconnector. 1000 A AC-23A, 690 V, 4 poles, IEC 60947-3. IP40. Available to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"297 mm","Range":"EasyPact","Width":"537 mm","title":"ENW24270","Height":"352 mm","Standards":"IEC 60947-3","Rated duty":"Continuous","description":"switch disconnector, EasyPact NW, 1000A, N, 4 Poles, right, fixed","Control type":"Push-button","Network type":"AC","Mounting mode":"Fixed","lifecycle_stage":"current","Connection pitch":"115 mm without spreader","Mounting support":"Base plate","Neutral position":"Right","Pollution degree":"4 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW10N","Network frequency":"50/60 Hz","Poles description":"4P","Device application":"Distribution","Connection position":"Horizontal Vertical","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 6000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 4000 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Location of connection":"Rear","IP degree of protection":"IP40","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 1000 A AC 50/60 Hz 690 V","[Ue] rated operational voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"50 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 25 kA during 3 s conforming to IEC 60947-3 at -5...70 °C","[Icm] rated short-circuit making capacity":"105 kA AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f31b8dc30839a2224abfec7c13c74ed6.pdf","sourceUrl":"https://www.se.com/in/en/product/ENW24270/switch-disconnector-easypact-nw-1000a-n-4-poles-right-fixed/"},"ai":{"faq":[{"question":"What is the ENW24270 used for?","answer":"It is a switch disconnector for power distribution — used as a visible-break isolating switch in main distribution boards, capable of making and breaking motor loads (AC-23A) up to 1000 A at 690 V."},{"question":"What compliance standards does the ENW24270 meet?","answer":"It is designed and tested to IEC 60947-3 for switch-disconnectors, with a rated insulation voltage of 1000 V and impulse withstand of 12 kV. Pollution degree 4 per IEC 60664-1 covers harsh environments."},{"question":"Where can I buy the ENW24270?","answer":"This part is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an inquiry for a firm commercial offer."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24270","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24270 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}