{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24274","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24274","canonicalUrl":"https://aoctrl.com/schneider/ENW24274","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24274","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW switch disconnector, ENW24274, 2500 A AC-23A, 4 poles, fixed mounting, IP40.","salesMarkdown":"## What the 2500 A AC-23A rating means for your line The ENW24274 is a Schneider Electric EasyPact NW switch disconnector rated for 2500 A in AC-23A duty at 690 V AC. AC-23A covers switching of motor loads and other highly inductive loads — this isn't a general-purpose disconnect for resistive heaters; it's sized for the inrush and breaking demands of large motors, transformers, or capacitor banks on a distribution feeder. The 4-pole configuration (right-side neutral) suits it for three-phase plus neutral distribution in panelboards or switchboards where you need a single disconnect point for the entire circuit. ## Withstand and making capacity — selectivity headroom Rated short-time withstand (Icw) is 50 kA for 1 second, or 25 kA for 3 seconds. That's the current the switch can carry without damage during a fault downstream while upstream protective devices clear. The rated short-circuit making capacity (Icm) is 105 kA peak — meaning it can close onto an existing fault without welding contacts. For a site electrical engineer coordinating selectivity, these numbers tell you the switch can sit behind a 50 kA-rated feeder breaker and still maintain coordination downstream. Fixed mounting on a base plate — no DIN rail for a switch this size. Dimensions are 537 mm wide by 352 mm high by 297 mm deep. Rear connection with vertical or horizontal orientation; connection pitch is 115 mm without spreader. IP40 protection means it's suitable for indoor panel installation where tools are required to access live parts. The isolation suitability per IEC 60947-3 means it provides visible-break isolation — the contact position indicator confirms open/closed status without needing to remove covers.","metaTitle":"ENW24274 EasyPact NW Switch Disconnector, 2500A, 4P","metaDescription":"Schneider Electric ENW24274 EasyPact NW switch disconnector, 2500A rated operational current in AC-23A, 4 poles, IP40. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"297 mm","Range":"EasyPact","Width":"537 mm","title":"ENW24274","Height":"352 mm","Standards":"IEC 60947-3","Rated duty":"Continuous","description":"switch disconnector, EasyPact NW, 2500A, N, 4 Poles, right, fixed","Control type":"Push-button","Network type":"AC","Mounting mode":"Fixed","lifecycle_stage":"current","Connection pitch":"115 mm without spreader","Mounting support":"Base plate","Neutral position":"Right","Pollution degree":"4 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW25N","Network frequency":"50/60 Hz","Poles description":"4P","Device application":"Distribution","Connection position":"Vertical Horizontal","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 5000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 2500 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Location of connection":"Rear","IP degree of protection":"IP40","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 2500 A AC 50/60 Hz 690 V","[Ue] rated operational voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"50 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 25 kA during 3 s conforming to IEC 60947-3 at -5...70 °C","[Icm] rated short-circuit making capacity":"105 kA AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2457adb0fa456cc11374667243e15234.pdf","sourceUrl":"https://www.se.com/ae/en/product/ENW24274/switch-disconnector-easypact-nw-2500a-n-4-poles-right-fixed/"},"ai":{"faq":[{"question":"What is the closest alternative to ENW24274 in the EasyPact family?","answer":"Within the EasyPact NW family, the closest alternative would be a different amp rating or pole count — the ENW24274 is the 2500 A, 4-pole, right-neutral variant. There is no pin-compatible drop-in with different ratings; the footprint changes with ampacity. If you need a different rating, the ENW25N base model (2500 A frame) shares the same physical platform."},{"question":"What compliance documentation does Schneider provide for ENW24274?","answer":"The ENW24274 is designed and tested to IEC 60947-3 for switch-disconnectors. It carries a rated insulation voltage of 1000 V AC and impulse withstand voltage of 12 kV per that standard. RoHS and REACH compliance documentation is standard for Schneider's EasyPact range — request it with your RFQ."},{"question":"Where can I buy ENW24274 and what is the lead time?","answer":"We source the ENW24274 to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for the current lead time and price."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24274","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24274 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}