{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24281","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24281","canonicalUrl":"https://aoctrl.com/schneider/ENW24281","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24281","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW switch disconnector, ENW24281, 2000 A, AC-23A, 4 poles, drawout, right neutral, 395 mm depth.","salesMarkdown":"The Schneider Electric ENW24281 is a 4-pole EasyPact NW switch disconnector rated for 2000 A in AC-23A duty at 690 V AC, 50/60 Hz. The drawout mounting lets you rack the unit out for maintenance without disturbing the main bus connections, which saves panel access time on a 2000 A line. Rated operational current of 2000 A in AC-23A at 690 V sets the continuous load it can carry and the motor-switching capability — not a resistive-only rating. Short-time withstand current of 66 kA for 1 s tells you the bus and contacts can survive a fault of that magnitude until an upstream breaker clears it, which is the coordination figure the panel designer needs. The short-circuit making capacity of 143 kA peak confirms it can close onto a fault without welding contacts — critical for a switch disconnector that may be used as a load-break device. This is a drawout switch disconnector for distribution panels — the 556 mm width and 439 mm height fit standard EasyPact NW cubicle cutouts. Rear connection with vertical or horizontal orientation and a 115 mm connection pitch without spreader means the bus bars land on fixed terminals behind the unit. The right-side neutral position is fixed, so verify your panel's neutral bus alignment before cutting the gland plate. IP40 is basic finger protection — fine inside a closed switchboard, not for washdown areas.","metaTitle":"Schneider Electric ENW24281 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW24281 EasyPact NW switch disconnector, 2000 A rated operational current, 4 poles, drawout mounting. IEC 60947-3, AC-23A duty. Active production. Sourced to or","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"395 mm","Range":"EasyPact","Width":"556 mm","title":"ENW24281","Height":"439 mm","Standards":"IEC 60947-3","Rated duty":"Continuous","description":"switch disconnector, EasyPact NW, 2000A, H, 4 Poles, right, withdrawal","Control type":"Push-button","Network type":"AC","Mounting mode":"Drawout","lifecycle_stage":"current","Connection pitch":"115 mm without spreader","Mounting support":"Rail","Neutral position":"Right","Pollution degree":"4 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW20H","Network frequency":"50/60 Hz","Poles description":"4P","Device application":"Distribution","Connection position":"Vertical Horizontal","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 6000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 4000 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Breaking capacity code":"HA","Location of connection":"Rear","IP degree of protection":"IP40","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 2000 A AC 50/60 Hz 690 V","[Ue] rated operational voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"66 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 36 kA during 3 s conforming to IEC 60947-3 at -5...70 °C","[Icm] rated short-circuit making capacity":"143 kA AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8ddb181ab2b1799fe5705182f4493270.pdf","sourceUrl":"https://www.se.com/ae/en/product/ENW24281/switch-disconnector-easypact-nw-2000a-h-4-poles-right-withdrawal/"},"ai":{"faq":[{"question":"What is the closest alternative to ENW24281 in the EasyPact NW family?","answer":"The ENW24281 is a 2000 A, 4-pole, drawout, right-neutral variant. The closest sibling would be the same frame with a different breaking capacity code or left-neutral position — the physical footprint and connection pitch are shared across the EasyPact NW H-range drawout units, so a panel cutout designed for this unit accepts the others in the same rating class. The deciding factor is the neutral position and the breaking capacity code (HA on this unit)."},{"question":"What compliance documentation does Schneider provide for ENW24281?","answer":"The ENW24281 is designed and tested to IEC 60947-3 for switch-disconnectors, including isolation suitability. The standard declaration of conformity and CE marking apply. For specific RoHS, REACH, or UL documentation, request the compliance package with your RFQ."},{"question":"How do I get current pricing and availability for ENW24281?","answer":"Submit an RFQ through this listing. Availability and current pricing are confirmed at quote time through independent distribution channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24281","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24281 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}