{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ENW24282","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ENW24282","canonicalUrl":"https://aoctrl.com/schneider/ENW24282","factsUrl":"https://aoctrl.com/api/mcp/products/ENW24282","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric EasyPact NW, switch disconnector, ENW25H, 2500 A AC-23A, 4 poles, drawout, right neutral, IP40.","salesMarkdown":"The Schneider Electric ENW24282 is a 4-pole switch disconnector from the EasyPact NW series, rated for 2500 A in AC-23A duty at 690 V AC. The drawout mounting (withdrawal chassis) lets you rack the unit out for inspection or replacement without disturbing the main bus connections — a real time-saver on switchgear where panel access is tight. Connection is rear-mounted, horizontal or vertical, with a 115 mm pitch without spreader. The AC-23A utilisation category covers switching of motor loads and other highly inductive circuits — 2500 A at 690 V is the operational current for that duty. For short-circuit conditions, the rated short-time withstand current (Icw) is 66 kA for 1 s and 36 kA for 3 s, and the making capacity (Icm) hits 143 kA peak. Those numbers tell you this disconnector can hold closed through a fault long enough for an upstream breaker to clear, without welding contacts. The IP40 enclosure keeps out tools and small solids but not moisture; if washdown is in the picture, plan for a higher-rated enclosure around it. Electrical durability under AC-23A is 5000 cycles at 440 V and 2500 cycles at 690 V — this is not a part you cycle daily in a high-speed process; it is a service disconnect that sees tens of operations per year.","metaTitle":"Schneider Electric ENW24282 EasyPact NW Switch Disconnector,","metaDescription":"Schneider Electric ENW24282 EasyPact NW switch disconnector, 2500 A rated operational current (AC-23A), 4 poles, drawout mounting, active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Air Circuit Breakers"],"specifications":{"Depth":"395 mm","Range":"EasyPact","Width":"556 mm","title":"ENW24282","Height":"439 mm","Standards":"IEC 60947-3","Rated duty":"Continuous","description":"switch disconnector, EasyPact NW, 2500A, H, 4 Poles, right, withdrawal","Control type":"Push-button","Network type":"AC","Mounting mode":"Drawout","lifecycle_stage":"current","Connection pitch":"115 mm without spreader","Mounting support":"Rail","Neutral position":"Right","Pollution degree":"4 conforming to IEC 60664-1","Range of product":"EasyPact NW","Device short name":"ENW25H","Network frequency":"50/60 Hz","Poles description":"4P","Device application":"Distribution","Connection position":"Horizontal Vertical","Utilisation category":"AC-23A","Electrical durability":"AC-23A: 5000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 2500 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3","Mechanical durability":"20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3","Breaking capacity code":"HA","Location of connection":"Rear","IP degree of protection":"IP40","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"1000 V AC 50/60 Hz conforming to IEC 60947-3","[Ie] rated operational current":"AC-23A: 2500 A AC 50/60 Hz 690 V","[Ue] rated operational voltage":"690 V AC 50/60 Hz conforming to IEC 60947-3","Ambient air temperature for storage":"-40...85 °C without control unit","Ambient air temperature for operation":"-5...70 °C","[Uimp] rated impulse withstand voltage":"12 kV conforming to IEC 60947-3","[Icw] rated short-time withstand current":"66 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 36 kA during 3 s conforming to IEC 60947-3 at -5...70 °C","[Icm] rated short-circuit making capacity":"143 kA AC at 50/60 Hz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c21f1d12027added9e73aeb84da05a27.pdf","sourceUrl":"https://www.se.com/in/en/product/ENW24282/switch-disconnector-easypact-nw-2500a-h-4-poles-right-withdrawal/"},"ai":{"faq":[{"question":"Where can I buy ENW24282 and how do I get a price?","answer":"The ENW24282 is sourced and quoted to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time."},{"question":"What are the key ratings for ENW24282?","answer":"The ENW24282 is rated 2500 A operational current in AC-23A duty at 690 V AC, with a short-time withstand current of 66 kA for 1 s and a making capacity of 143 kA peak. It is a 4-pole switch disconnector with drawout mounting, suitable for isolation per IEC 60947-3."},{"question":"What compliance documentation does Schneider provide for ENW24282?","answer":"The ENW24282 is designed and tested to IEC 60947-3, with a rated insulation voltage of 1000 V AC and impulse withstand voltage of 12 kV. Pollution degree 4 per IEC 60664-1 is declared. For specific RoHS/REACH/UL documentation, request the manufacturer's compliance declaration at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ENW24282","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ENW24282 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}