{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FCE200523B200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"FCE200523B200","canonicalUrl":"https://aoctrl.com/schneider/FCE200523B200","factsUrl":"https://aoctrl.com/api/mcp/products/FCE200523B200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SHS servo motor, FCE200523B200, 4000 rpm, 3 Nm nominal torque, 1260 W, 3-phase, IP69K/IP67, with holding brake and absolute multiturn Hiperface encoder, smooth shaft 19 mm diameter, 270.7 mm cable with stripped ends.","salesMarkdown":"## Motor specs that drive the selection The FCE200523B200 is a Schneider SHS servo motor rated for 1260 W continuous output at 4000 rpm nominal speed, with a nominal torque of 3 Nm and a peak stall torque of 28.3 Nm — that peak figure is what gets a load through a sticky spot without tripping the drive. It ships with an absolute multiturn SinCos Hiperface encoder — single-cable feedback that carries position and temperature data back to the drive, no separate encoder cable needed. IP69K on the motor body means it survives high-pressure, high-temperature washdown — a food-processing or pharmaceutical line fit. IP67 on the motor means the cable entry and bearing seal are protected against temporary immersion. ## Mounting and shaft interface Flange size is 100 mm (3.9 in), centring collar depth 3.5 mm. The smooth shaft is 19 mm diameter, 40 mm long with a 6 mm keyway — standard NEMA or IEC metric interface, no custom adapter needed. Electrical connection is a cable with stripped ends, 270.7 mm long. That's a fixed pigtail — plan the cable routing to the drive within that length, or budget a junction box. Maximum radial force at the shaft is 660 N at 4000 rpm, maximum axial force 160 N. If the load applies a belt tension or overhung load above those numbers, the bearing life drops fast. ## Electrical and thermal limits Stator resistance is 1.4 Ω, inductance 8.8 mH, back EMF constant 2.1 V/krpm at 20 °C. The torque constant is 1.18 Nm/A — so the drive's current loop directly sets the torque output, no conversion factor needed. Peak current is 28.3 A for 3 seconds — that's the I²t limit for the winding temperature. Continuous current at stall is 6.75 Nm, 3 Nm at rated speed. The hot-spot copper temperature is 130 °C; the natural-convection cooling relies on the motor surface being clear of debris. Switching frequency is 8 kHz — standard for a servo drive PWM stage. The motor is a 4-pole, 3-stack design, so it's a medium-inertia rotor tuned for dynamic response rather than ultra-low cogging.","metaTitle":"Schneider Electric FCE200523B200 SHS Motor, 4000 rpm, 3 Nm","metaDescription":"FCE200523B200 Schneider Electric SHS servo motor, 4000 rpm, 3 Nm nominal torque, 1260 W, IP69K/IP67, with holding brake and Hiperface encoder. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Cable Assemblies (Cord Sets)"],"specifications":{"Phase":"Three phase","title":"FCE200523B200","Length":"10.7 in (270.7 mm)","Inertia":"0.62 kg.cm² of brake 3.22 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","description":"servo motor SHS 100 3,0Nm,brake,4k RPM","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"3.22 kg.cm²","Holding torque":"41.16 lbf.in (4.65 N.m)","Nominal torque":"26.6 lbf.in (3 N.m) LXM62 400 V three phase 26.6 lbf.in (3 N.m) LXM52 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.18 N.m/A","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1260 W","Mounting Support":"Flange","Sizing reference":"SC005H3301","Back emf constant":"2.1 V/krpm 68 °F (20 °C)","Device short name":"SHS","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) LXM62 3100 mA, 400 V, 3 phase 250.5 lbf.in (28.3 N.m) LXM52 3100 mA, 400 V, 3 phase","Stator inductance":"8.8 mH","Stator resistance":"1.4 Ohm","Switching frequency":"8 kHz","Maximum current Irms":"28.3 A LXM62 28.3 A LXM52","Nominal output power":"1260 W LXM62 1260 W LXM52","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Cable with stripped end","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Number of motor stacks":"3","Output current 3s peak":"28.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"59.74 lbf.in (6.75 N.m) LXM62 59.74 lbf.in (6.75 N.m) LXM52","IP degree of protection":"IP69K motor: conforming to IEC 60034-5 IP67 motor: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 4000 rpm","Mounting holes diameter":"0.3 in (8 mm)","Centring collar diameter":"3.3 in (85 mm)","Continuous stall current":"5.7 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"3.1 A","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"400 V","Circle diameter of the mounting holes":"3.9 in (100 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0b8a68992ff819481343631d81a01cbc.pdf","sourceUrl":"https://www.se.com/be/en/product/FCE200523B200/servo-motor-shs-100-30nmbrake4k-rpm/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for FCE200523B200?","answer":"The motor is IP69K and IP67 conforming to IEC 60034-5. No RoHS, REACH, or UL declaration is in this record — request the declaration of conformity from the supplier at RFQ time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/FCE200523B200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/FCE200523B200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}