{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FCE200524B200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"FCE200524B200","canonicalUrl":"https://aoctrl.com/schneider/FCE200524B200","factsUrl":"https://aoctrl.com/api/mcp/products/FCE200524B200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric FCE200524B200 cable assembly, three phase, 10.7 in (270.7 mm) length, stripped ends, for Lexium servo motors.","salesMarkdown":"## Lexium servo motor cable — three-phase power and feedback in one assembly The FCE200524B200 is a factory-terminated cable assembly for Schneider Electric's Lexium SHS servo motor series, combining three-phase power conductors with an absolute multiturn SinCos Hiperface encoder feedback pair in a single jacket. Rated for 970 W continuous output at 6000 rpm nominal speed, it mates motors delivering 1.55 Nm nominal torque and 4.65 Nm holding torque — sized for the SC005H2301 reference. ## Length, termination, and environmental sealing The 10.7 in (270.7 mm) fixed-length cable terminates in stripped ends at the drive side — field-wired into the Lexium drive connector or a junction box, not pre-molded. The motor end carries IP69K protection (conforming to IEC 60034-5) for high-pressure washdown environments, with IP67 as the baseline — suitable for food-and-bev lines or outdoor installations where hose-down cleaning is routine. ## Performance specs that govern the load match Peak stall torque reaches 10.3 Nm at 15.2 A peak current (LXM62/LXM52 drives at 400 V three-phase), while continuous stall torque is 2.5 Nm — the thermal limit under natural convection cooling. Stator resistance of 2.7 Ohm and inductance of 13 mH define the winding time constant; the 8 kHz switching frequency of the mating drive must be compatible with the cable's capacitance to avoid reflected-wave voltage spikes on long runs. The 14 mm smooth shaft with a 6 mm keyway and 40 mm shaft length fits standard Lexium motor flanges (100 mm flange size, 2.5 mm centring collar depth).","metaTitle":"Schneider Electric FCE200524B200 Cable Assembly, 10.7 in","metaDescription":"Schneider Electric FCE200524B200 cable assembly for Lexium servo motors. Three phase, 10.7 in (270.7 mm) length, stripped ends.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Cable Assemblies (Cord Sets)"],"specifications":{"Phase":"Three phase","title":"FCE200524B200","Length":"10.7 in (270.7 mm)","Inertia":"0.0 kg.cm² of brake 0.58 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","description":"servo motor SHS 100 1,55Nm,no brake,6k RPM","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"6000 rpm","Rotor inertia":"0.58 kg.cm²","Holding torque":"41.16 lbf.in (4.65 N.m)","Nominal torque":"13.72 lbf.in (1.55 N.m) LXM62 400 V three phase 13.72 lbf.in (1.55 N.m) LXM52 400 V three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.7 N.m/A","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"970 W","Mounting Support":"Flange","Sizing reference":"SC005H2301","Back emf constant":"2.1 V/krpm 68 °F (20 °C)","Device short name":"SHS","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"91.2 lbf.in (10.3 N.m) LXM62 2350 mA, 400 V, 3 phase 91.2 lbf.in (10.3 N.m) LXM52 2350 mA, 400 V, 3 phase","Stator inductance":"13 mH","Stator resistance":"2.7 Ohm","Switching frequency":"8 kHz","Maximum current Irms":"15.2 A LXM62 15.2 A LXM52","Nominal output power":"970 W LXM62 970 W LXM52","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Cable with stripped end","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Number of motor stacks":"3","Output current 3s peak":"15.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"22.1 lbf.in (2.5 N.m) LXM62 22.1 lbf.in (2.5 N.m) LXM52","IP degree of protection":"IP69K motor: conforming to IEC 60034-5 IP67 motor: conforming to IEC 60034-5","Maximum radial force Fr":"400 N 6000 rpm","Mounting holes diameter":"0.2 in (6 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.6 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"2.35 A","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"400 V","Circle diameter of the mounting holes":"2.8 in (71 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/644bb03f65b6bc828fbf0f7fceb863d7.pdf","sourceUrl":"https://www.se.com/ie/en/product/FCE200524B200/servo-motor-shs-100-155nmno-brake6k-rpm/"},"ai":{"faq":[{"question":"What is FCE200524B200's listed length and phase configuration?","answer":"The cable assembly is 10.7 in (270.7 mm) long and wired for three-phase power, with stripped ends for field termination."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/FCE200524B200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/FCE200524B200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}