{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FCE200525B200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"FCE200525B200","canonicalUrl":"https://aoctrl.com/schneider/FCE200525B200","factsUrl":"https://aoctrl.com/api/mcp/products/FCE200525B200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric FCE200525B200 motor cable assembly, three-phase, 12.07 in (306.7 mm) length, 840 W continuous power, 2000 rpm nominal speed, with holding brake and absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Motor cable for Lexium servo drives This FCE200525B200 is a pre-terminated motor cable assembly for Schneider Electric's Lexium 52 and 62 servo drive families, carrying three-phase power at 840 W continuous and 2000 rpm nominal speed. The cable length is 12.07 in (306.7 mm) — a short pigtail meant for tight panel-to-motor routing where excess cable loop is not an option. Rated 840 W continuous output power with 4 N.m nominal torque at 2000 rpm — this matches the LXM62 and LXM52 drive ratings at 400 V three-phase input. Peak stall torque hits 18.3 N.m at 1900 mA, enough for high-inertia starts or rapid acceleration cycles on a conveyor or spindle axis. The holding brake (6.75 N.m) locks the shaft when power is removed — critical for vertical-axis loads that must not drift during a power loss or E-stop. Absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle after power-up — saves time on multi-axis machines where each axis must know its absolute position at boot. ## Mounting and integration notes Flange-mounted motor with 100 mm flange size and smooth shaft (19 mm diameter, 40 mm length) — direct fit to standard Lexium motor brackets. IP69K and IP67 motor protection per IEC 60034-5 means the motor body handles high-pressure washdown (IP69K) and temporary immersion (IP67) — suitable for food-and-bev or washdown zones. Cable terminates with stripped ends — no connector on the motor side; you land the wires directly in the drive or junction box. Confirm the terminal block accepts the stripped wire gauge before committing. Natural convection cooling — no fan, so the motor relies on its own surface area and the machine frame for heat rejection. Derate if mounted in a confined space with restricted airflow.","metaTitle":"Schneider Electric FCE200525B200 Motor Cable, 840 W","metaDescription":"Schneider Electric FCE200525B200 motor cable assembly, 12.07 in length, three-phase, 840 W continuous power, 2000 rpm, with holding brake and absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Cable Assemblies (Cord Sets)"],"specifications":{"Phase":"Three phase","title":"FCE200525B200","Length":"12.07 in (306.7 mm)","Inertia":"0.0 kg.cm² of brake 2.31 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","description":"servo motor SHS 100 4,0Nm,no brake,2k RPM","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm","Rotor inertia":"2.31 kg.cm²","Holding torque":"59.74 lbf.in (6.75 N.m)","Nominal torque":"35.4 lbf.in (4 N.m) LXM62 400 V three phase 35.4 lbf.in (4 N.m) LXM52 400 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.1 N.m/A","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"840 W","Mounting Support":"Flange","Sizing reference":"SC005H3202","Back emf constant":"1.18 V/krpm 68 °F (20 °C)","Device short name":"SHS","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) LXM62 1900 mA, 400 V, 3 phase 162.0 lbf.in (18.3 N.m) LXM52 1900 mA, 400 V, 3 phase","Stator inductance":"45.7 mH","Stator resistance":"8.6 Ohm","Switching frequency":"8 kHz","Maximum current Irms":"9 A LXM62 9 A LXM52","Nominal output power":"840 W LXM62 840 W LXM52","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Cable with stripped end","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Number of motor stacks":"2","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"41.16 lbf.in (4.65 N.m) LXM62 41.16 lbf.in (4.65 N.m) LXM52","IP degree of protection":"IP69K motor: conforming to IEC 60034-5 IP67 motor: conforming to IEC 60034-5","Maximum radial force Fr":"790 N 2000 rpm","Mounting holes diameter":"0.3 in (8 mm)","Centring collar diameter":"3.3 in (85 mm)","Continuous stall current":"2.2 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Maximum permanent current":"2 A","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"400 V","Circle diameter of the mounting holes":"3.9 in (100 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/70dd8e838be50ebda739ca6ab1994952.pdf","sourceUrl":"https://www.se.com/ie/en/product/FCE200525B200/servo-motor-shs-100-40nmno-brake2k-rpm/"},"ai":{"faq":[{"question":"What drives does this cable assembly work with?","answer":"It is designed for Schneider Electric Lexium 62 and Lexium 52 servo drives at 400 V three-phase, carrying 840 W continuous power and 4 N.m nominal torque."},{"question":"What is the cable length and termination?","answer":"The cable is 12.07 in (306.7 mm) long with stripped ends — a short pigtail for direct wiring into the drive or junction box."},{"question":"Does this motor cable include a brake and encoder?","answer":"Yes, it includes a holding brake (6.75 N.m) and an absolute multiturn SinCos Hiperface encoder for position feedback without a homing cycle."},{"question":"What IP rating does the motor have?","answer":"IP69K and IP67 per IEC 60034-5 — the motor withstands high-pressure washdown and temporary immersion, suitable for food processing or outdoor washdown areas."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/FCE200525B200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/FCE200525B200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}