{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FRN0059G2S-2GU","brand":"Fuji Electric","brandSlug":"fuji-electric","productSlug":"FRN0059G2S-2GU","canonicalUrl":"https://aoctrl.com/fuji-electric/FRN0059G2S-2GU","factsUrl":"https://aoctrl.com/api/mcp/products/FRN0059G2S-2GU","rawCanonicalId":null},"summary":{"shortDescription":"Fuji Electric FRENIC-Eco series, variable frequency drive, FRN0059G2S-2GU, 20 hp, 60 A, 200-240V AC input, NEMA 1 enclosure.","salesMarkdown":"The Fuji FRN0059G2S-2GU is a FRENIC-Eco series variable frequency drive rated for 20 hp output at 60 A, fed from a 200-240V AC three-phase input. It's an open-style (NEMA 1) drive meant for panel mounting, with a heat sink that needs free air movement around it. The 0.1 to 120 Hz output frequency range covers most constant-torque and variable-torque HVAC fan and pump applications, and the 50% starting torque at 1 Hz means it'll get a load moving without a lot of fiddling with boost parameters. The 60 A maximum output current at 230V AC is the hard limit for continuous motor load; sizing to that number rather than the horsepower rating keeps the IGBT junction temps in check during a full-load run. Input voltage tolerance of +10% / -15% on the 200-240V AC nominal means it'll ride through a sag down to 170V AC without dropping out — useful on a plant bus with big motor starts. The NEMA 1 enclosure is finger-safe but not sealed; keep it indoors, away from washdown or dust. ## Integration notes Mounting dimensions are 15-3/4 in high by 9-7/8 in wide by 8-1/2 in deep — plan for a backplate that clears the heat sink fins on the rear. The 7 digital inputs and 3 analog inputs give enough I/O for a basic speed reference and start/stop from a remote contact without an expansion card. No Ethernet port on this variant, so plan for a serial or analog link to the PLC unless you add a comms option. The LCD/LED display shows output frequency, current, voltage, and fault codes in plain text — no laptop needed for a quick status check at startup.","metaTitle":"Fuji FRN0059G2S-2GU FRENIC-Eco VFD, 20 hp, 60 A, 208V AC","metaDescription":"Fuji FRN0059G2S-2GU FRENIC-Eco variable frequency drive, 20 hp, 60 A output, 200-240V AC input, NEMA 1. Active production. UL/CSA/EN certified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["AC Drive (VFD) 240V"],"specifications":{"Brand":"FUJI ELECTRIC","Color":"Blue","Style":"Heat Sink","Series":"FRENIC - Eco","Displays":"Motor Speed With Percent, Alarm Code, Menu, Function Code","Enclosure":"Open","Standards":"UL508C, C22.2 No.14, EN50178-1997","Input Type":"Analog; Digital","Protection":"Drive Thermal Overload; Motor Thermal Overload; Over breaking; Overvoltage; Phase Failure; Phase to Phase or Phase to Ground Short Circuit; Under voltage","Application":"HV AC","Output Type":"Analog; Digital","Control Type":"Keypad, Remote","Display Type":"LCD, LED","Input Voltage":"208V AC","Overall Depth":"8-1/2 in","Overall Width":"9-7/8 in","Torque @ 1 Hz":"50%","Control Method":"Variable Frequency Control","Input Phase AC":"Three","Output Voltage":"240V AC","Overall Height":"15-3/4 in","Digital Readout":"Output Frequency, Output Current, Output Voltage","Dynamic Braking":"Yes","Input Frequency":"50/60 Hz","Output Phase AC":"Three","Starting Torque":"50%","lifecycle_stage":"current","Enclosure Rating":"NEMA 1","Number of Inputs":"(7) Digital; (3) Analog","Number of Outputs":"(5) Digital; (2) Analog","Start/Stop Control":"Programmable","Torque Application":"Variable Torque","Input Voltage Range":"200V-240V AC +10% / -15%","Maximum Output Power":"20 hp","Output Voltage Range":"0V AC to 230V AC","Brake Chopper Included":"No","Ethernet Port Included":"No","Maximum Output Current":"60 A","Output Frequency Range":"0.1 to 120 Hz","With Bypass / No Bypass":"No Bypass","Accepts Input Control Signal":"Remote Contact","Adjustable Acceleration Time":"0 to 3,600 sec","Adjustable Deceleration Time":"0 to 3,600 sec","With Line Contactor / No Line Contactor":"No Line Contactor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/FRN0059G2S-2GU/alternatives.json"},"ai":{"faq":[{"question":"What certifications does the FRN0059G2S-2GU carry?","answer":"It is certified to UL508C, CSA C22.2 No.14, and EN50178-1997."},{"question":"What is the input voltage range for this drive?","answer":"Nominal input is 200-240V AC three-phase, with a tolerance of +10% / -15%."},{"question":"Does this drive include a brake chopper?","answer":"No, the brake chopper is not included. Dynamic braking is supported, but an external resistor and chopper module are required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/fuji-electric/FRN0059G2S-2GU","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/fuji-electric/FRN0059G2S-2GU when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}