{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FRN0115G2S-2GU","brand":"Fuji Electric","brandSlug":"fuji-electric","productSlug":"FRN0115G2S-2GU","canonicalUrl":"https://aoctrl.com/fuji-electric/FRN0115G2S-2GU","factsUrl":"https://aoctrl.com/api/mcp/products/FRN0115G2S-2GU","rawCanonicalId":null},"summary":{"shortDescription":"Fuji Electric FRENIC-Eco series, FRN0115G2S-2GU, 40 hp variable frequency drive, 114 A output, 208V AC three-phase input, NEMA 1 enclosure.","salesMarkdown":"The Fuji FRN0115G2S-2GU is a 40 hp variable frequency drive from the FRENIC-Eco series, sized for a 114 A maximum output current at 230V AC three-phase output. It accepts 208V AC three-phase input (200-240V AC +10%/-15% range) at 50/60 Hz. The 114 A rating is the continuous output current — that's the number to match against your motor's full-load amps, not the 40 hp figure, since motor efficiency and service factor vary. Output frequency spans 0.1 to 120 Hz, covering most induction motor speed ranges for fans, pumps, and conveyors. This is a no-bypass, open-enclosure drive rated NEMA 1 (indoor use, drip-proof). It includes a built-in dynamic braking transistor — no external brake chopper needed — which matters for vertical loads or quick deceleration profiles on conveyors. The 50% starting torque at 1 Hz (variable torque application) means it handles centrifugal loads like fans and pumps cleanly without oversizing. ## I/O and control summary Control is via keypad or remote contacts. The drive accepts 7 digital and 3 analog inputs, and provides 5 digital and 2 analog outputs. The LCD/LED display shows motor speed (with percent), output frequency, output current, output voltage, alarm codes, and function codes. Start/stop is programmable; the digital readout covers the three key running parameters you'd monitor during commissioning. ## Physical integration Physical footprint: 21-3/4 inches high, 12-5/8 inches wide, 10 inches deep. Blue enclosure, open style with a heat sink. The NEMA 1 rating means it's intended for indoor panel mounting where dripping water or incidental contact is a concern, but it's not sealed against hose-down or outdoor exposure. No Ethernet port on this variant — control is via hardwired I/O or remote contacts.","metaTitle":"Fuji FRN0115G2S-2GU FRENIC-Eco VFD, 40 hp, 114 A","metaDescription":"Fuji FRN0115G2S-2GU FRENIC-Eco series VFD, 40 hp, 114 A output, 208V AC three-phase input, NEMA 1 enclosure. Current lifecycle stage. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["AC Drive (VFD) 240V"],"specifications":{"Brand":"FUJI ELECTRIC","Color":"Blue","Style":"Heat Sink","Series":"FRENIC - Eco","Displays":"Motor Speed With Percent, Alarm Code, Menu, Function Code","Enclosure":"Open","Standards":"UL508C, C22.2 No.14, EN50178-1997","Input Type":"Analog; Digital","Protection":"Drive Thermal Overload; Motor Thermal Overload; Over breaking; Overvoltage; Phase Failure; Phase to Phase or Phase to Ground Short Circuit; Under voltage","Application":"HV AC","Output Type":"Analog; Digital","Control Type":"Keypad, Remote","Display Type":"LCD, LED","Input Voltage":"208V AC","Overall Depth":"10 in","Overall Width":"12-5/8 in","Torque @ 1 Hz":"50%","Control Method":"Variable Frequency Control","Input Phase AC":"Three","Output Voltage":"230V AC","Overall Height":"21-3/4 in","Digital Readout":"Output Frequency, Output Current, Output Voltage","Dynamic Braking":"Yes","Input Frequency":"50/60 Hz","Output Phase AC":"Three","Starting Torque":"50%","lifecycle_stage":"current","Enclosure Rating":"NEMA 1","Number of Inputs":"(7) Digital; (3) Analog","Number of Outputs":"(5) Digital; (2) Analog","Start/Stop Control":"Programmable","Torque Application":"Variable Torque","Input Voltage Range":"200V-240V AC +10% / -15%","Maximum Output Power":"40 hp","Output Voltage Range":"0V AC to 230V AC","Brake Chopper Included":"No","Ethernet Port Included":"No","Maximum Output Current":"114 A","Output Frequency Range":"0.1 to 120 Hz","With Bypass / No Bypass":"No Bypass","Accepts Input Control Signal":"Remote Contact","Adjustable Acceleration Time":"0 to 3,600 sec","Adjustable Deceleration Time":"0 to 3,600 sec","With Line Contactor / No Line Contactor":"No Line Contactor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/FRN0115G2S-2GU/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this drive?","answer":"40 hp maximum output power, 114 A maximum output current at 230V AC three-phase output, 208V AC three-phase input (200-240V AC +10%/-15% range), output frequency 0.1 to 120 Hz."},{"question":"What compliance standards does this drive meet?","answer":"It is listed to UL508C, CSA C22.2 No.14, and EN50178-1997."},{"question":"Does this drive include a brake chopper?","answer":"No external brake chopper is needed — the drive includes a built-in dynamic braking transistor (Dynamic Braking: Yes, Brake Chopper Included: No)."},{"question":"What is the enclosure rating and physical size?","answer":"NEMA 1 (indoor drip-proof). Dimensions: 21-3/4 in high, 12-5/8 in wide, 10 in deep. Blue, open style with heat sink."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/fuji-electric/FRN0115G2S-2GU","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/fuji-electric/FRN0115G2S-2GU when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}