{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FX2N-10PG","brand":"Mitsubishi Electric","brandSlug":"mitsubishi","productSlug":"FX2N-10PG","canonicalUrl":"https://aoctrl.com/mitsubishi/FX2N-10PG","factsUrl":"https://aoctrl.com/api/mcp/products/FX2N-10PG","rawCanonicalId":null},"summary":{"shortDescription":"Pulse output block FX 2 N - 10 PG","salesMarkdown":null,"metaTitle":"FX2N-10PG - Mitsubishi Electric","metaDescription":"Pulse output block FX 2 N - 10 PG","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"Mass":"0.2 Kg","PG 0":"Pulse width 50 μs or more","Frequency":"57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)","φ A, φ B":"2 phase pulse 30 kHz or less (Duty 50%)","Control unit":"pulse, μm, 10 -4 inch, mdeg","Manufacturer":"Mitsubishi Electric","Use altitude":"Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.","Control input":"Control input: 3 points (START, DOG, PG 0) Interrupt input: 2 points (X0, X1) 2 phase pulser input: 1 point (φA, φB)","Position data":"1 point (set with sequence program) 200 point (table) can be set when table positioning operation is performed.","Noise immunity":"Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si","Use atmosphere":"There is no corrosive property, flammable gas, conductive dust (dust) is not serious","Shipping Weight":"1.2 Kg","lifecycle_stage":"eol_hot","Output frequency":"1 MHz","Impact resistance":"147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse","Maximum frequency":"1 MHz","Positioning range":"-2, 147, 483, 648 to +2, 147, 483, 647 pulse -2, 147, 483, 648 to +2, 147, 483, 647 [X (position data magnification) μm] -2, 147, 483, 648 to +2, 147, 483, 647 [X (position data magnification) X 10 -4 inch] -2, 147, 483, 648 to +2, 147, 483, 647 [X (position data magnification) mdeg] The position data magnification can be set to X 1, X 10, X 10 2, or X 10 3 in the parameter. It can be set in the range of -2, 147, 483, 648 to +2, 147, 483, 647 in terms of pulse conversion value.","Pulse output form":"Pulse train + direction, forward rotation / reverse rotation pulse train","Relative humidity":"5 to 95% RH (noncondensing).... in operation","Withstand voltage":"Between external terminals and ground terminal of PLC main unit: AC 500 V for 1 minute","Circuit insulation":"Photocoupler insulation","Clear signal (CLR)":"20 mA or less","Ambient temperature":"0 to 55 ° C. ... Operating, -25 to 75 ° C. ..... Save","Estimated Lead Time":"1 - 10 Working Days","Pulse output method":"Differential line driver system","Power-supply voltage":"DC 5 V 120 mA (Internal power supply from PLC)","Programming language":"BFM can be specified directly by sequence program (FROM / TO instruction, application instruction operand)","Application sequencer":"FX2N, FX3U, FX2NC, FX3UCFX2NC - CNV - IF is required for connection to FX2NC. To connect to FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required.","Insulation resistance":"Between the external terminals collectively and the ground terminal of the programmable controller main body: 500 MV DC insulation resistance meter 5 MΩ or more","Number of control axes":"Independent single axis","Input operation display":"LED ON when input is ON","Number of output points":"3 points (FP, RP, CLR)","Output operation indication":"LED on when output is ON","Direct installation Frequency":"10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)","Number of occupied I / O points":"Sequencer input / output 8 points occupation (It can count either input or output)","Acceleration / deceleration processing":"Automatic trapezoidal acceleration / deceleration, approximate S-shaped acceleration / deceleration","Input capture speed START, DOG, X0, X1":"0.1 ms or less (DOG is 1.0 ms or less)","Input signal format START, DOG, X0, X1":"Contact or open collector transistor","Input ON sensitivity START, DOG, X0, X1":"4.5 mA or more","Input signal current START, DOG, X0, X1":"6.5 mA ± 1 mA","Input signal voltage START, DOG, X0, X1":"DC 24 V ± 10%","Output form Pulse output unit (FP / RP)":"You can select forward rotation (FP) / reverse rotation (RP) or pulse (PLS) / direction (DIR).","Input OFF sensitivity START, DOG, X0, X1":"1.5 mA or less","Output method Pulse output unit (FP / RP)":"Differential line driver output","Leakage current when OFF Clear signal (CLR)":"0.1 mA or less","Rated load voltage Pulse output unit (FP / RP)":"DC 5 V to 24 V (power supplied from the VIN terminal)","Maximum load current Pulse output unit (FP / RP)":"25 mA or less","Maximum voltage drop during ON Clear signal (CLR)":"1.5V or less","Anti-vibration When DIN rail is installed Frequency":"10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)","VIN consumption current Pulse output unit (FP / RP)":"At 24 VDC: 70 mA at 5 VDC : 100 mA","Absolute position detection (ABS current value reading)":"Use sequencer's ABS command"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$142.00","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/FX2N-10PG/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/mitsubishi/FX2N-10PG","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/mitsubishi/FX2N-10PG when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}