{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FX2N-1PG-E","brand":"Mitsubishi Electric","brandSlug":"mitsubishi","productSlug":"FX2N-1PG-E","canonicalUrl":"https://aoctrl.com/mitsubishi/FX2N-1PG-E","factsUrl":"https://aoctrl.com/api/mcp/products/FX2N-1PG-E","rawCanonicalId":null},"summary":{"shortDescription":"Mitsubishi FX2N-1PG-E, single-axis pulse generator unit for FX2N/FX3U series, 100 kHz max output, open-collector, end-of-life","salesMarkdown":"Mitsubishi FX2N-1PG-E, single-axis pulse generator unit for FX2N/FX3U series, 100 kHz max output, open-collector, end-of-life","metaTitle":"Mitsubishi FX2N-1PG-E Pulse Generator Unit, EOL Sourced to O","metaDescription":"FX2N-1PG-E, Mitsubishi end-of-life pulse generator for FX2N/FX3U PLCs. 100 kHz max, single-axis open-collector. Sourced against RFQ from surplus channel.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"Mass":"0.3 Kg","PG 0":"4 μs","STOP":"4 ms","Frequency":"57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)","Control unit":"pulse, μm, 10 -4 inch, mdeg","Manufacturer":"Mitsubishi Electric","Control input":"Three points (STOP, DOG, PG 0)","Output method":"Open collector transistor output","Position data":"1 point (set by sequence program)","Noise immunity":"Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si tor with period of 30 to 100 Hz","Use atmosphere":"There is no corrosive property, flammable gas, conductive dust (dust) is not serious | Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.","Shipping Weight":"1.5 Kg","lifecycle_stage":"eol_hot","Output frequency":"100 kHz","Impact resistance":"147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse","Maximum frequency":"100 kHz","Pulse output form":"Pulse train + direction, forward rotation / reverse rotation pulse train","Relative humidity":"5 to 95% RH (noncondensing).... in operation","Withstand voltage":"Between external terminals and ground terminal of PLC main unit: AC 500 V for 1 minute","Circuit insulation":"Photocoupler insulation","Clear signal (CLR)":"20 mA or less","Ambient temperature":"0 to 55 ° C. ... Operating, -25 to 75 ° C. ..... Save","Estimated Lead Time":"1 - 10 Working Days","Input signal format":"Contact or open collector transistor","Pulse output method":"Open collector method","Power-supply voltage":"DC 5 V 55 mA ( internal power supply from the sequencer) DC 24 V ± 10% 40 mA (external power supply)","Programming language":"BFM can be specified directly by sequence program (FROM / TO instruction, application instruction operand)","Application sequencer":"FX2N, FX3U, FX2NC, FX3UCFX2NC - CNV - IF is required for connection to FX2NC. To connect to FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required.","Insulation resistance":"Between the external terminals collectively and the ground terminal of the programmable controller main body: 500 MV DC insulation resistance meter 5 MΩ or more","Number of control axes":"Independent single axis","Input capture speed DOG":"1 ms","Input operation display":"LED ON when input is ON","Number of output points":"3 points (FP, RP, CLR)","Output operation indication":"LED on when output is ON","Direct installation Frequency":"10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)","Input ON sensitivity STOP, DOG":"4.5 mA or more","Input signal current STOP, DOG":"7 mA","Input signal voltage STOP, DOG":"DC 24V","Input OFF sensitivity STOP, DOG":"1.5 mA or less","Number of occupied I / O points":"Sequencer input / output 8 points occupation (It can count either input or output)","Acceleration / deceleration processing":"Automatic trapezoidal acceleration / deceleration","Output form Pulse output unit (FP / RP)":"You can select forward rotation (FP) / reverse rotation (RP) or pulse (PLS) / direction (DIR).","Rated load voltage Pulse output unit (FP / RP)":"DC 5 V to 24 V (power supplied from the VIN terminal)","Maximum load current Pulse output unit (FP / RP)":"20 mA or less","Anti-vibration When DIN rail is installed Frequency":"10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)","VIN consumption current Pulse output unit (FP / RP)":"35 mA or less","Absolute position detection (ABS current value reading)":"Use sequencer's ABS command"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$87.00","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/FX2N-1PG-E/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/mitsubishi/FX2N-1PG-E","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/mitsubishi/FX2N-1PG-E when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}