{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"G2R-1-SND DC12(S)","brand":"Omron","brandSlug":"omron","productSlug":"G2R-1-SND-DC12~1S~2","canonicalUrl":"https://aoctrl.com/omron/G2R-1-SND-DC12~1S~2","factsUrl":"https://aoctrl.com/api/mcp/products/G2R-1-SND%20DC12(S)","rawCanonicalId":null},"summary":{"shortDescription":"Omron G2RS Series, General Purpose Relay, SPDT, 12V DC Coil, 10 A @ 250V AC / 10 A @ 30V DC, LED Indicator, 5-Pin Terminal, No Test Button.","salesMarkdown":"The Omron G2R-1-SND DC12(S) is a G2RS-series general-purpose relay with a 12V DC coil and a single-pole double-throw (SPDT) contact set. The contacts are rated 10 A at 250 V AC and 10 A at 30 V DC — a symmetrical 10 A resistive rating that covers both mains AC and low-voltage DC loads without derating. The LED indicator across the coil terminals gives a quick visual on coil health; no push-to-test button is fitted on this variant. The 10 A contact rating at 250 V AC means this relay switches resistive loads up to 2500 VA — enough for a contactor coil, a solenoid valve, or a small motor starter pilot circuit. The same 10 A at 30 V DC covers low-voltage control loops and DC-powered indicators without a separate derating curve for DC inductive loads. Dielectric strength is 5,000 V AC between coil and contacts, so it isolates the 12V DC control side from the switched mains side cleanly — no arc-over risk in a panel with mixed voltages. Electrical operating durability is listed at 100,000 cycles; mechanical durability reaches 10,000,000 operations. For a relay that will see continuous cycling in a PLC output or timer circuit, the 100k electrical figure is the practical limit — after that, contact wear from breaking load current sets in. The 10M mechanical figure is useful for life-of-panel planning: the armature and spring assembly outlast the contacts by two orders of magnitude. ## Deployment context This is a 5-pin PCB-mount relay — no socket, no DIN-rail clip. The pins are on a standard 0.2-inch grid, so it drops into a PCB header or a pre-drilled panel board. The LED indicator and the 12V DC coil make it a natural fit for a 12V DC control bus in a small PLC cabinet or a building-automation controller.","metaTitle":"Omron G2R-1-SND DC12(S) G2RS Relay, SPDT, 12V DC, 10A","metaDescription":"Omron G2R-1-SND DC12(S) general-purpose relay, 12V DC coil, SPDT contacts rated 10A @ 250V AC. Current lifecycle stage, sourced to order. LED indicator.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["General Purpose Relays"],"specifications":{"Brand":"OMRON","Series":"G2RS","Coil Voltage":"12V DC","Contact Form":"SPDT","lifecycle_stage":"current","Status Indicator":"LED Indicator","Contact Rating (AC)":"10 A @ 250V","Contact Rating (DC)":"10 A @ 30V","Dielectric Strength":"1,000V AC, 50/60 Hz for 1 min Between Contacts of Same Polarity; 5,000V AC, 50/60 Hz for 1 min Between Coil and Contacts","Push-To-Test Button":"No Test Button","Number of Pins/Terminals":"5","Electrical Connection Type":"Pin","Coil Voltage (Nominal@60Hz)":"12V DC","Electrical Operating Durability":"100,000","Mechanical Operating Durability":"10,000,000; 20,000,000"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.29","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4789877c588b5171ce127ef51bfe5384.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/G2R-1-SND%20DC12(S)/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy G2R-1-SND DC12(S)?","answer":"This part is sourced to order through independent distribution. Submit an RFQ for current availability and pricing — confirmed at quote time."},{"question":"What is the coil voltage and contact configuration?","answer":"The coil is 12V DC, and the contact form is SPDT (single-pole double-throw). Contacts are rated 10 A at 250 V AC and 10 A at 30 V DC."},{"question":"Will G2R-1-SND DC12(S) drop into a panel wired for G2R-2-SNDI DC24(S)?","answer":"No — the G2R-1-SND DC12(S) has 5 pins and a 12V DC coil, while the G2R-2-SNDI DC24(S) uses 8 pins and a 24V DC coil. They are not pin-compatible and require different coil voltages, so rewiring is needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/omron/G2R-1-SND-DC12~1S~2","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/G2R-1-SND-DC12~1S~2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}