{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600030701D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600030701D","canonicalUrl":"https://aoctrl.com/schneider/GBX0600030701D","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600030701D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0600030701D planetary gearbox, straight teeth, 60 mm diameter, 3:1 reduction ratio, 28 N.m continuous output torque, 20 arcmin backlash, IP54 shaft output.","salesMarkdown":"The GBX0600030701D: The 3:1 reduction ratio triples the motor-side torque at the output shaft while cutting output speed by the same factor — a standard ratio for stepping up torque from a servo or stepper motor without needing a second reduction stage. Continuous output torque is 28 N.m, with a maximum peak of 45 N.m — the 17 N.m headroom handles acceleration transients and intermittent overloads, but sustained operation above 28 N.m shortens the 30,000-hour service life at 100 rpm and 30 °C. 96 % efficiency means 4 % of the transmitted power is lost as heat inside the gearbox — at 28 N.m and 100 rpm output (roughly 293 W mechanical), the heat loss is about 12 W, which the black anodized aluminium housing dissipates without forced cooling in most panel environments. ## Backlash and rigidity — positioning precision limits Maximum torsional backlash is 20 arc.minutes — acceptable for general positioning and indexing where the load doesn't reverse direction under torque, but too loose for a closed-loop axis that needs repeatable bidirectional positioning below 0.1°. Torsional rigidity is 2.3 N.m/arcmin — under the 28 N.m continuous load, the gearbox wind-up is roughly 12 arc.minutes, which adds to the static backlash and must be accounted for in the servo loop gain if the encoder is on the motor side. ## Shaft loads and bearing life — don't overhang the output Maximum radial force at mid-span on the output shaft is 340 N at 100 rpm for the full 30,000-hour service life at 30 °C — exceeding this derates the bearing life; at 500 N the service life drops to 10,000 hours. Maximum axial force is 450 N at 100 rpm for 30,000 hours at 30 °C — axial loads above this, such as from a helical pinion pushing into the gearbox, force a shorter replacement interval or a larger frame size. The shaft output carries an IP54 rating — protects against dust ingress and splashing water, but not submersion or high-pressure washdown; the sealing at the shaft exit is the wear item, not the anodized housing. ## Active production — sourced against a BOM line Lubricated for life — no maintenance grease ports or scheduled re-lubrication; the gearbox is sealed at the factory and replaced as a unit at end of service life.","metaTitle":"Schneider Electric GBX0600030701D Planetary Gearbox","metaDescription":"Schneider Electric GBX0600030701D planetary gearbox, 3:1 reduction, 28 N.m continuous torque, 96% efficiency, IP54 shaft output.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"title":"GBX0600030701D","Efficiency":"96 %","Noise level":"58 dB at 1 m, no-load","description":"gearbox with straight teeth GBX- Ø 60 mm- reduction 3:1- < 20arcmin- 28 N.m","Gear box type":"Straight teeth","Housing colour":"Black","Shaft material":"C 45","Reduction ratio":"3:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Moment Of Inertia":"0.135 g.cm²","Mounting position":"Any position","Compatibility code":"GBX","Torsional rigidity":"2.3 N.m/arcmin","Maximum output torque":"45 N.m","Service life in hours":"30000 h at 100 rpm at 30 °C","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N at 100 rpm, during 30000 hour at 30°C 600 N at 100 rpm, during 10000 hour at 30°C","IP degree of protection":"Shaft output: IP54","Maximum radial force Fr":"340 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N at 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"28 N.m","Gearbox external diameter":"60 mm","Product or component type":"Planetary gearbox","Maximum torsional backlash":"20 arc.min","Ambient Temperature For Operation":"-25...90 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0cd51a5b9247c5217391be76b6614252.pdf","sourceUrl":"https://www.se.com/ie/en/product/GBX0600030701D/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-31-20arcmin-28-n-m/"},"ai":{"faq":[{"question":"What is the continuous torque rating of GBX0600030701D and how does it compare to the peak?","answer":"Continuous output torque is 28 N.m, with a maximum peak of 45 N.m. The 17 N.m margin covers acceleration transients, but sustained operation above 28 N.m reduces the 30,000-hour service life at 100 rpm and 30 °C."},{"question":"What is the noise level of GBX0600030701D at no-load?","answer":"The gearbox produces 58 dB at 1 m under no-load conditions — comparable to a quiet office environment, suitable for indoor machinery where acoustic emissions are a concern."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600030701D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600030701D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}