{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600050574G","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600050574G","canonicalUrl":"https://aoctrl.com/schneider/GBX0600050574G","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600050574G","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0600050574G planetary gearbox, straight teeth, 60 mm diameter, 5:1 reduction, 40 N.m continuous torque at 100 rpm, 96% efficiency.","salesMarkdown":"The GBX0600050574G is a 60 mm-diameter planetary gearbox with straight-cut teeth and a 5:1 reduction ratio — sized for servo or stepper motor output stages where compact inline torque multiplication is needed. Continuous output torque is 40 N.m at 100 rpm at 30 °C, with a maximum intermittent rating of 64 N.m at the same speed and temperature — the gap between continuous and peak covers acceleration and short overloads without oversizing the gearbox. Efficiency sits at 96 %, which means about 4 % of input power is lost as heat through the gear mesh and bearings — for a motor delivering 400 W at the input, roughly 384 W reaches the load shaft. Noise level is 58 dB at 1 m under no-load — quiet enough for lab or light assembly environments where operator exposure limits are a concern, but expect a few dB more under full torque. ## Sourcing reality — obsolete, quoted to order Available through independent surplus and broker channels; quantities are lot-specific and confirmed at RFQ. No factory lead time applies — each lot is sourced as found. The service life is rated 30,000 hours at 100 rpm at 30 °C under continuous torque — if the replacement gearbox is going into a machine with remaining life past that window, budget for a second unit or a redesign to a current-series planetary. ## Mounting and integration — any position, IP54 shaft output Mounts in any position — no oil fill orientation restrictions since it's lubricated for life with a sealed grease charge. Shaft output seal is rated IP54 — splash-resistant but not submersible; keep the output shaft out of direct washdown or coolant spray. Ambient operating range is -25 to 90 °C — suitable for unheated plant floors or near-oven conveyor drives, but the 30 °C torque ratings derate above that ambient; no formal derating curve is published, so plan a margin if running above 40 °C. Torsional rigidity is 2.3 N.m/arcmin — a stiffness figure that tells you how many arc-minutes of windup you get per N.m of load; for a 5:1 ratio with 40 N.m continuous, expect about 17 arcmin of elastic twist at the output under full load. ## Backlash and load limits — what fits a precision axis Maximum torsional backlash is 16 arcmin — this is a standard-precision planetary, not a zero-backlash unit; suitable for positioning where the load holds position against friction, but not for bidirectional reversing with tight positional repeatability. Maximum axial force (Fa) on the output shaft is 450 N at 100 rpm for the full 30,000-hour life, or 600 N if you accept a shorter 10,000-hour life — the bearing life is the constraint, not the shaft strength. Maximum radial force (Fr) applied at mid-shaft is 340 N for 30,000 hours or 500 N for 10,000 hours — belt-drive loads or overhung pulleys must stay within these limits or the output bearing wears prematurely.","metaTitle":"Schneider Electric GBX0600050574G Planetary Gearbox, 5:1","metaDescription":"Schneider Electric GBX0600050574G planetary gearbox, 5:1 ratio, 40 N.m continuous torque at 100 rpm. Obsolete — sourced to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"96 %","Noise level":"58 dB at 1 m, no-load","Gear box type":"Straight teeth","Housing colour":"Black","Shaft material":"C 45","Reduction ratio":"5:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Moment Of Inertia":"0.078 g.cm²","Mounting position":"Any position","Compatibility code":"GBX","Torsional rigidity":"2.3 N.m/arcmin","Maximum output torque":"64 N.m at 100 rpm at 30 °C","Service life in hours":"30000 h at 100 rpm at 30 °C","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N at 100 rpm, during 30000 hour at 30°C 600 N at 100 rpm, during 10000 hour at 30°C","IP degree of protection":"Shaft output: IP54","Maximum radial force Fr":"340 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N at 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"40 N.m at 100 rpm at 30 °C","Gearbox external diameter":"60 mm","Product or component type":"Planetary gearbox","Maximum torsional backlash":"16 arc.min","Ambient Temperature For Operation":"-25...90 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/30d026821a33783fcb700691a138b40a.pdf","sourceUrl":"https://www.se.com/nz/en/product/GBX0600050574G/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-51-16arcmin-40-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0600050574G/alternatives.json"},"ai":{"faq":[{"question":"What is GBX0600050574G's listed efficiency?","answer":"96 % at rated load. That means roughly 4 % of input power is lost as heat through the gear mesh and bearings — typical for a single-stage planetary with straight-cut teeth."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600050574G","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600050574G when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}