{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600201002F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600201002F","canonicalUrl":"https://aoctrl.com/schneider/GBX0600201002F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600201002F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0600201002F planetary gearbox, straight teeth, 60 mm diameter, 20:1 reduction, 44 N.m continuous output torque, 94 % efficiency, IP54 shaft output.","salesMarkdown":"The GBX0600201002F is a 60 mm planetary gearbox with straight teeth and a 20:1 reduction ratio, delivering 44 N.m continuous output torque at 100 rpm and 30 °C ambient. That continuous torque figure — 389.4 lbf.in — is the load you can hold indefinitely without overheating the gear mesh; the maximum output torque of 70 N.m (619.6 lbf.in) is the ceiling for intermittent peak loads, not steady-state running. Efficiency is listed at 94 %, which means about 6 % of the input power is lost as heat in the gear train — typical for a single-stage planetary at this ratio. The noise level of 58 dB at 1 m, no-load, is quiet enough for an enclosed cabinet but audible in a silent room; under load the gear whine will rise a few dB. ## Mounting and environmental constraints The housing is black anodized aluminium with a 60 mm external diameter. The shaft output carries an IP54 rating — meaning it resists dust ingress and splashing water at the seal, but it is not submersible. Mount it with the output shaft horizontal or vertical-down; the lubricated-for-life grease charge stays in place, but a vertical-up mount can starve the upper bearing over the 30000-hour service life at rated load. Shaft material is C45 carbon steel — standard for this torque class. The maximum axial force Fa is 450 N at 100 rpm for the full 30000-hour life, or 600 N if you only need 10000 hours. Radial force Fr at mid-span on the output shaft is 340 N for 30000 hours, 500 N for 10000 hours. Exceed these and the bearing race will spall before the gear teeth wear out. ## Lifecycle reality — obsolete, sourced to order Schneider Electric lists the GBX0600201002F as obsolete. That means the only supply channel is independent surplus and broker stock — quantities are lot-specific and confirmed at RFQ. If you are planning a line-down replacement or a BOM freeze, budget for a functional alternative with a different mounting footprint; a board spin or adapter plate is likely. The torsional backlash is rated at a maximum of 20 arc.min — that is the lost motion in the gear train when reversing direction. For positioning applications that need better than 0.3° repeatability, this box will need a preloaded or low-backlash alternative. The torsional rigidity of 2.5 N.m/arcmin tells you how much wind-up you get under load: at 44 N.m continuous, expect about 17.6 arcmin of elastic deflection before the backlash is taken up.","metaTitle":"Schneider Electric GBX0600201002F Planetary Gearbox, 20:1","metaDescription":"Schneider Electric GBX0600201002F planetary gearbox, 60 mm, 20:1 ratio, 44 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"58 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"20:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"2.5 N.m/arcmin","Maximum output torque":"619.6 lbf.in (70 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N 100 rpm, during 30000 hour at 30°C 600 N 100 rpm, during 10000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"340 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"389.4 lbf.in (44 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"2.4 in (60 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"20 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7cc502d98c19d0fe97a8c65bdbf027a0.pdf","sourceUrl":"https://www.se.com/us/en/product/GBX0600201002F/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-201-20arcmin-44-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0600201002F/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous torque rating of the GBX0600201002F?","answer":"The continuous output torque is 44 N.m (389.4 lbf.in) at 100 rpm and 30 °C ambient. The maximum intermittent torque is 70 N.m (619.6 lbf.in) — do not run steady-state above the continuous figure."},{"question":"What is the noise level of this gearbox?","answer":"The noise level is 58 dB measured at 1 m, no-load. Under load the level will increase a few dB depending on the reflected inertia and torque."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600201002F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600201002F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}