{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600320701F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600320701F","canonicalUrl":"https://aoctrl.com/schneider/GBX0600320701F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600320701F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0600320701F planetary gearbox, straight teeth, 60 mm diameter, 32:1 reduction, 44 N.m continuous torque, 94% efficiency, IP54 shaft output.","salesMarkdown":"## What the 32:1 reduction and 44 N.m continuous torque mean for your drive train The GBX0600320701F is a 60 mm planetary gearbox with a 32:1 reduction ratio, delivering 44 N.m continuous output torque at 100 rpm and 30 °C. That continuous rating is the figure to size against your load's duty cycle — the maximum output torque of 70 N.m is a short-duration peak, not a running spec. Efficiency sits at 94 %, which means about 6 % of input power is lost as heat through the straight-tooth mesh. For a servo or stepper application, that heat stays inside the black anodized aluminium housing — plan for the thermal rise in a confined panel if the duty cycle is high. The 20 arc-min maximum torsional backlash is typical for a straight-tooth planetary stage at this price point. If your positioning repeatability demands tighter than 0.33° at the output, you would need a low-backlash or helical version — this one is a right-sized spec for indexing or conveyor drives where the load holds position after stop. ## Lifecycle reality — obsolete, but still specifiable for MRO Schneider Electric lists the GBX0600320701F as obsolete. That means no new production from the factory — the supply channel is independent surplus and broker stock. For a line-down replacement or a BOM that already carries this order code, we source it against an RFQ and confirm availability at quote time. The 30,000-hour service life at 100 rpm and 30 °C is factory-rated for the lubricated-for-life grease fill. If your application runs hotter than 30 °C or at higher speed, the service life derates — the 10,000-hour figures for axial and radial force give a sense of the trade-off at higher loads. If you need a pin-compatible drop-in, the best route is to compare the 60 mm flange diameter, 32:1 ratio, and 44 N.m continuous torque against current planetary offerings from the same or alternate brands — the mounting interface and shaft dimensions will be the deciding fit check. ## Mounting and environmental fit — IP54 and the 58 dB noise floor The shaft output carries an IP54 rating — protected against dust ingress and splashing water. That suits indoor machine builds, conveyor drives, and packaging lines where washdown is occasional, not continuous. The housing itself is black anodized aluminium, which sheds heat but is not rated for corrosive washdown chemicals. Noise is listed at 58 dB at 1 m, no-load. That is quiet enough for most production floors — comparable to a small pump motor. Under load the straight-tooth mesh will be louder; budget for enclosure damping if the gearbox sits near an operator station. Operating ambient range is -25 to 90 °C, which covers most indoor industrial environments. The lubricated-for-life grease is selected for that band — no field relubrication ports, so the gearbox is a sealed, replaceable unit at end of life.","metaTitle":"Schneider Electric GBX0600320701F Planetary Gearbox, 32:1","metaDescription":"Schneider Electric GBX0600320701F planetary gearbox, 32:1 reduction, 44 N.m continuous torque, 94% efficiency, IP54 shaft output.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"58 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"32:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"2.5 N.m/arcmin","Maximum output torque":"619.6 lbf.in (70 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N 100 rpm, during 30000 hour at 30°C 600 N 100 rpm, during 10000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"340 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"389.4 lbf.in (44 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"2.4 in (60 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"20 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ab2498f9572f7657151a56f80c285d3c.pdf","sourceUrl":"https://www.se.com/ie/en/product/GBX0600320701F/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-321-20arcmin-44-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0600320701F/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous output torque of GBX0600320701F?","answer":"44 N.m at 100 rpm and 30 °C. That is the rating to size your load against for continuous duty. The maximum output torque is 70 N.m, but that is a short-duration peak — do not run the application at that level continuously."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600320701F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600320701F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}