{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600321002F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600321002F","canonicalUrl":"https://aoctrl.com/schneider/GBX0600321002F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600321002F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0600321002F planetary gearbox, straight teeth, 60 mm diameter, 32:1 reduction ratio, 44 N.m continuous output torque, 94% efficiency, 58 dB noise level.","salesMarkdown":"The GBX0600321002F is a 60 mm-diameter planetary gearbox from Schneider Electric's GBX series, with a 32:1 reduction ratio and straight-cut teeth. Continuous output torque is 44 N.m at 100 rpm and 30 °C; peak torque reaches 70 N.m under the same conditions, which is the overload ceiling before the gear teeth yield. Efficiency is listed at 94 % — the loss is mostly gear mesh friction, not bearing drag, so the thermal rise stays low in continuous duty. Noise measures 58 dB at 1 m, no-load, which is quiet enough for a lab or inspection station without an enclosure. ## Service life, backlash, and the limits that govern fit Rated service life is 30,000 hours at 100 rpm and 30 °C — that is about 3.4 years of continuous 24/7 operation before the lubricant degrades or the gear flanks wear past the backlash spec. Maximum torsional backlash is 20 arc.min, which is a standard precision class for a planetary stage at this diameter; a servo loop with a high-gain position controller will need to account for this windup in the tuning. Maximum radial force on the output shaft is 340 N at mid-span for the full 30,000-hour life, or 500 N if you accept a 10,000-hour service interval. Axial force limits are 450 N and 600 N respectively. Overhung loads from a belt pulley or a pinion gear must stay inside these envelopes or the bearing race spalls early. The housing is black anodized aluminium with an IP54 rating at the shaft output — dust-tight and splash-resistant, but not submersible. Ambient operating range is -25 to 90 °C, which covers most indoor machine environments but not a washdown zone or a freezer tunnel. ## Obsolete — sourcing through independent channels Schneider Electric lists the GBX0600321002F as obsolete. Available through independent surplus and broker channels. No pin-compatible or dimensionally identical alternative from the GBX family has been designated as a replacement.","metaTitle":"Schneider GBX0600321002F Planetary Gearbox, 32:1, 44 N.m","metaDescription":"Schneider Electric GBX0600321002F planetary gearbox, 60 mm diameter, 32:1 reduction, 44 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"58 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"32:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"2.5 N.m/arcmin","Maximum output torque":"619.6 lbf.in (70 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N 100 rpm, during 30000 hour at 30°C 600 N 100 rpm, during 10000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"340 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"389.4 lbf.in (44 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"2.4 in (60 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"20 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c8b3b5881bec66eca497f9dab4853f16.pdf","sourceUrl":"https://www.se.com/ca/en/product/GBX0600321002F/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-321-20arcmin-44-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0600321002F/alternatives.json"},"ai":{"faq":[{"question":"What is GBX0600321002F's continuous output torque rating?","answer":"Continuous output torque is 44 N.m at 100 rpm and 30 °C. Maximum output torque is 70 N.m under the same conditions."},{"question":"What is the noise level of this gearbox?","answer":"Noise level is 58 dB measured at 1 m, no-load. This is low enough for noise-sensitive environments without additional acoustic enclosures."},{"question":"What is the service life of GBX0600321002F?","answer":"Rated service life is 30,000 hours at 100 rpm and 30 °C. The gearbox is lubricated for life, so no periodic oil changes are required within that window."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600321002F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600321002F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}