{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600400584D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600400584D","canonicalUrl":"https://aoctrl.com/schneider/GBX0600400584D","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600400584D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX series planetary gearbox, straight teeth, 60 mm diameter, reduction 40:1, continuous output torque 40 N.m, torsional backlash 25 arc-min, efficiency 94 %, IP54 shaft output.","salesMarkdown":"## 40 N.m continuous, 70 N.m peak — sizing the GBX0600400584D The GBX0600400584D is a 60 mm-frame planetary gearbox with a 40:1 reduction ratio. The continuous output torque is 40 N.m, with a maximum peak of 70 N.m — that peak figure governs acceleration and emergency-stop loads, not the steady-state duty cycle. Torsional rigidity is 2.5 N.m/arcmin, and the rated torsional backlash is 25 arc-min. This is a standard-precision grade — suitable for positioning axes where the load reversal error budget allows about half a degree of lost motion at the output. ## Straight-teeth planetary — thermal and noise profile Straight-tooth spur planetary gearing, not helical. The efficiency is 94 %, which means 6 % of the input power dissipates as heat inside the housing — with a 40:1 ratio and 40 N.m output, the thermal loss at rated load is about 10-15 W, manageable in the black anodised aluminium body without forced cooling. Noise level is 58 dB at 1 m, no-load. Straight teeth are inherently noisier than helical at higher speeds, but at the output speeds typical of a 40:1 reduction from a servo (roughly 30-40 rpm output at 1200-1600 rpm input), the 58 dB figure holds — it's the input-stage gear mesh that dominates the acoustic signature. ## Lubricated for life — 30,000 hour service interval The gearbox is lubricated for life and rated for 30,000 hours at 100 rpm output, 30 °C ambient. No oil changes, no regreasing — the grease fill is sealed for the service life. The ambient range is -25 to 90 °C, so it works in unheated enclosures or near a motor hotspot. Shaft output seal is IP54 — splash protection, not submersion. The C45 steel output shaft handles 450 N axial force (Fa) and 340 N radial force (Fr) at the 30,000-hour rating; at the 10,000-hour rating those figures rise to 600 N axial and 500 N radial. If your load exceeds the 30k-hour limits, plan for the shorter service interval. ## Obsolete — sourcing through independent channels Schneider Electric lists the GBX0600400584D as obsolete. No official successor part number is published. The gearbox is available through independent surplus and broker channels — quantities are lot-specific and confirmed at RFQ against your BOM line. Because this is a legacy planetary gearbox with a specific 60 mm frame, 40:1 ratio, and 40 N.m continuous rating, the closest functional replacement would need to match the mounting flange pattern, shaft diameter, and input interface — not just the ratio and torque. Confirm the input bore and keyway dimensions against your motor shaft before committing.","metaTitle":"Schneider Electric GBX0600400584D Planetary Gearbox, 40:1","metaDescription":"Schneider Electric GBX0600400584D planetary gearbox, 40:1 ratio, 40 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"58 dB at 1 m, no-load","Gear box type":"Straight teeth","Housing colour":"Black","Shaft material":"C 45","Reduction ratio":"40:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Moment Of Inertia":"0.064 g.cm²","Mounting position":"Any position","Compatibility code":"GBX","Torsional rigidity":"2.5 N.m/arcmin","Maximum output torque":"70 N.m","Service life in hours":"30000 h at 100 rpm at 30 °C","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N at 100 rpm, during 30000 hour at 30°C 600 N at 100 rpm, during 10000 hour at 30°C","IP degree of protection":"Shaft output: IP54","Maximum radial force Fr":"340 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N at 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"40 N.m","Gearbox external diameter":"60 mm","Product or component type":"Planetary gearbox","Maximum torsional backlash":"25 arc.min","Ambient Temperature For Operation":"-25...90 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cad7af44fe0bfce5e4612eb6cf7b8302.pdf","sourceUrl":"https://www.se.com/nl/en/product/GBX0600400584D/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-401-25arcmin-40-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0600400584D/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous and peak output torque of GBX0600400584D?","answer":"Continuous output torque is 40 N.m; maximum output torque is 70 N.m. The 70 N.m figure covers acceleration peaks and emergency stops, not steady-state running."},{"question":"What does the 94% efficiency rating mean for this gearbox?","answer":"94 % efficiency means 6 % of the input power is lost as heat inside the housing. For a 40:1 reduction at 40 N.m output, the thermal loss is roughly 10-15 W — the black anodised aluminium housing dissipates this without a fan in most servo applications."},{"question":"What is the noise level of GBX0600400584D?","answer":"Noise level is 58 dB at 1 m, no-load. Straight-tooth spur gearing is noisier than helical, but at the low output speeds typical of a 40:1 reduction the 58 dB figure is representative — the input-stage mesh dominates the sound."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600400584D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600400584D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}