{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0600601002F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0600601002F","canonicalUrl":"https://aoctrl.com/schneider/GBX0600601002F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0600601002F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0600601002F planetary gearbox, straight teeth, 60 mm diameter, 60:1 reduction ratio, 44 N.m continuous torque, 94% efficiency, IP54 shaft output, black anodized aluminium housing.","salesMarkdown":"The GBX0600601002F is a 60 mm-diameter planetary gearbox with a 60:1 reduction ratio, delivering 44 N.m continuous output torque at 100 rpm and 30 °C ambient. The 94 % efficiency figure means 6 % of the input power is lost as heat in the gear train — budget that thermal load into the enclosure if the duty cycle is sustained. Maximum output torque reaches 70 N.m at the same speed and temperature — this is the peak overload capacity for acceleration or momentary stall, not the continuous rating. The 30000-hour service life at 100 rpm and 30 °C sets the L10 bearing life under rated load; running at higher speed or temperature derates that interval. ## Backlash, noise, and ingress — the integration constraints Maximum torsional backlash is 22 arc.min — this is the lost motion at the output shaft when reversing direction. For positioning axes that require repeatability under 10 arc.min, this gearbox introduces too much play; a helical or low-backlash planetary would be needed. The straight-tooth geometry is the source of both the backlash figure and the 58 dB noise level at 1 m no-load — straight teeth are noisier than helical but lower-cost to manufacture. Shaft output is rated IP54, meaning the output seal resists dust ingress and splashing water — suitable for washdown-adjacent areas but not for pressurized spray or immersion. The black anodized aluminium housing resists corrosion in humid or mildly acidic environments; the C45 steel shaft handles standard keyed or clamping couplings. Maximum radial force at the output shaft is 340 N at 100 rpm for the 30000-hour life target, rising to 500 N if the application accepts a 10000-hour service life. Axial force limits are 450 N and 600 N respectively under the same duty splits. Overhung loads from belt drives or pinions must stay within these envelopes to avoid premature bearing failure. ## Obsolete — sourcing through independent channels Schneider Electric lists the GBX0600601002F as obsolete. The part is sourced through independent surplus and broker channels — quantities are lot-specific, and availability is confirmed at RFQ time, not from a live stock count. The gearbox is lubricated for life, so no field oil-change schedule applies — the sealed grease charge is good for the rated service life. The ambient operating range is -25 to 90 °C, which covers most indoor industrial environments but not freezer or high-heat zones without derating the life target.","metaTitle":"Schneider Electric GBX0600601002F Planetary Gearbox, 60:1","metaDescription":"Schneider Electric GBX0600601002F planetary gearbox, 60:1 ratio, 44 N.m continuous torque, 94% efficiency, IP54 shaft output.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"58 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"60:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"2.5 N.m/arcmin","Maximum output torque":"619.6 lbf.in (70 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"450 N 100 rpm, during 30000 hour at 30°C 600 N 100 rpm, during 10000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"340 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 500 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"389.4 lbf.in (44 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"2.4 in (60 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"22 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/612b539a4393ba9afaa87525483c3d2e.pdf","sourceUrl":"https://www.se.com/ie/en/product/GBX0600601002F/gearbox-with-straight-teeth-gbx-ø-60-mm-reduction-601-22arcmin-44-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0600601002F/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous torque rating of GBX0600601002F?","answer":"The continuous output torque is 44 N.m at 100 rpm and 30 °C ambient. The maximum torque for intermittent overload is 70 N.m under the same conditions."},{"question":"What compliance documentation does Schneider Electric provide for GBX0600601002F?","answer":"The part carries an IP54 rating on the shaft output and is lubricated for life. Compliance documentation should be requested at RFQ time from the supplying distributor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0600601002F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0600601002F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}