{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0800150553F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0800150553F","canonicalUrl":"https://aoctrl.com/schneider/GBX0800150553F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0800150553F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0800150553F planetary gearbox, straight teeth, 80 mm diameter, 15:1 reduction, 110 N.m continuous output torque, 94% efficiency, IP54 shaft output.","salesMarkdown":"## Torque and duty-cycle constraints The GBX0800150553F is a planetary gearbox with straight teeth, 80 mm outer diameter, and a 15:1 reduction ratio. Its continuous output torque is 973.6 lbf.in (110 N.m) at 100 rpm and 86 °F (30 °C), with a maximum output torque of 1557.7 lbf.in (176 N.m) under the same conditions — the margin above continuous is the overload headroom for transient peaks, not sustained operation. Service life is rated at 30,000 hours at 100 rpm and 30 °C, with the gearbox lubricated for life — no maintenance interval for oil changes, which simplifies the BOM for sealed-drive assemblies. ## Mechanical ratings and environmental fit Maximum torsional backlash is 14 arc.min — this is the angular play at the output shaft under reversing loads. For positioning applications requiring less than 0.5° cumulative error, a lower-backlash gearbox (e.g. 5 arc.min or less) would be specified; 14 arc.min suits indexing and conveyor drives where reversal accuracy is not critical. Maximum axial force Fa is 1200 N at 100 rpm for a 10,000-hour service life, derating to 900 N for the full 30,000-hour rating. Maximum radial force Fr is 950 N at 100 rpm (10,000-hour life) and 650 N at 30,000 hours, both applied at mid-distance from the output shaft. These limits govern the overhung load from a belt pulley or chain sprocket — exceeding them reduces bearing life below the stated service hours. Ambient temperature range is -13 to 194 °F (-25 to 90 °C), covering most indoor industrial enclosures and outdoor cabinet installations. The shaft output seal is rated IP54, meaning protection against dust ingress and splashing water — suitable for dry indoor environments but not washdown or submerged service. ## Efficiency and noise floor Efficiency is listed at 94 %, which is typical for a single-stage planetary gearbox at full load. The noise level is 60 dB at 1 m, no-load — this is the acoustic baseline without load-induced gear mesh harmonics; under load the level rises with torque and speed. ## Lifecycle status and sourcing Per the manufacturer's record, the GBX0800150553F is classified as Obsolete. Sourcing is through independent distribution channels; quantities are confirmed at RFQ against the specific BOM line. The shaft material is C 45 steel (medium-carbon, through-hardened), and the housing is black anodized aluminium. These materials are standard for this class of gearbox and do not limit the part's compatibility with common motor flanges or mounting brackets.","metaTitle":"Schneider Electric GBX0800150553F Planetary Gearbox, 15:1","metaDescription":"Schneider Electric GBX0800150553F planetary gearbox, 80 mm diameter, 15:1 reduction, 110 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"60 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"15:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"6.5 N.m/arcmin","Maximum output torque":"1557.7 lbf.in (176 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"1200 N 100 rpm, during 10000 hour at 30°C 900 N 100 rpm, during 30000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"650 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"973.6 lbf.in (110 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"3.1 in (80 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"14 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/11f94295777c665085177a80d024359b.pdf","sourceUrl":"https://www.se.com/ca/en/product/GBX0800150553F/gearbox-with-straight-teeth-gbx-ø-80-mm-reduction-151-14arcmin-110-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0800150553F/alternatives.json"},"ai":{"faq":[{"question":"What is GBX0800150553F's continuous torque rating?","answer":"Continuous output torque is 973.6 lbf.in (110 N.m) at 100 rpm and 86 °F (30 °C). Maximum output torque is 1557.7 lbf.in (176 N.m) under the same conditions, representing the transient overload ceiling."},{"question":"What compliance documentation is available for GBX0800150553F?","answer":"The evidence does not list RoHS, REACH, UL, or IEC certificates for this part. For audit purposes, the manufacturer's standard declaration of conformity for the GBX series would be the baseline; confirm specific documentation requirements at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0800150553F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0800150553F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}