{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0800320701D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0800320701D","canonicalUrl":"https://aoctrl.com/schneider/GBX0800320701D","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0800320701D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0800320701D planetary gearbox, straight teeth, 80 mm diameter, 32:1 reduction, 120 N.m continuous torque, 94 % efficiency, 17 arc.min backlash.","salesMarkdown":"## Sourcing a discontinued planetary gearbox The GBX0800320701D is listed as obsolete. No official successor is recorded from Schneider Electric. Sourcing this unit goes through independent distribution channels — quantities are confirmed at RFQ against the BOM line. For a motion-control build requiring a 32:1 reduction with 120 N.m continuous torque at 94 % efficiency, this gearbox was a fit. The lifecycle status means procurement must verify availability per lot, not per catalogue. ## Torque, backlash, and duty-cycle limits Continuous output torque is 120 N.m, with a maximum of 192 N.m. The torsional rigidity of 6.5 N.m/arcmin and maximum backlash of 17 arc.min define the positioning repeatability — relevant for indexing or pick-and-place axes where cumulative error matters. Service life is rated 30,000 hours at 100 rpm and 30 °C. The gearbox is lubricated for life, so no field regreasing interval — the seal integrity at the shaft output (IP54) governs the lifetime in dusty or washdown-adjacent environments. Maximum axial force on the output shaft is 1200 N at 100 rpm for a 10,000-hour life, dropping to 900 N for the full 30,000-hour window. Radial force limits follow the same pattern: 950 N (10,000 h) vs 650 N (30,000 h) at mid-shaft. These are the constraints for overhung loads like belt pulleys or chain sprockets. The 80 mm diameter black anodized aluminium housing accepts any mounting position. Shaft material is C45 steel. Noise level is 60 dB at 1 m, no-load — quiet enough for lab or light assembly lines without an acoustic enclosure. Ambient operating range is -25 to 90 °C. The straight-tooth design is typical for cost-sensitive, moderate-speed planetary stages — helical gears would offer lower noise but are not specified here.","metaTitle":"Schneider Electric GBX0800320701D Planetary Gearbox, 32:1","metaDescription":"Schneider Electric GBX0800320701D planetary gearbox, 80 mm diameter, 32:1 ratio, 120 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"60 dB at 1 m, no-load","Gear box type":"Straight teeth","Housing colour":"Black","Shaft material":"C 45","Reduction ratio":"32:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Moment Of Inertia":"0.39 g.cm²","Mounting position":"Any position","Compatibility code":"GBX","Torsional rigidity":"6.5 N.m/arcmin","Maximum output torque":"192 N.m","Service life in hours":"30000 h at 100 rpm at 30 °C","Additional information":"Lubricated for life","Maximum axial force Fa":"1200 N at 100 rpm, during 10000 hour at 30°C 900 N at 100 rpm, during 30000 hour at 30°C","IP degree of protection":"Shaft output: IP54","Maximum radial force Fr":"650 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N at 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"120 N.m","Gearbox external diameter":"80 mm","Product or component type":"Planetary gearbox","Maximum torsional backlash":"17 arc.min","Ambient Temperature For Operation":"-25...90 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ba323aa233f73ac9a58a3d99352efa0.pdf","sourceUrl":"https://www.se.com/nl/en/product/GBX0800320701D/gearbox-with-straight-teeth-gbx-ø-80-mm-reduction-321-17arcmin-120-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0800320701D/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0800320701D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0800320701D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}