{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0800601002F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0800601002F","canonicalUrl":"https://aoctrl.com/schneider/GBX0800601002F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0800601002F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0800601002F planetary gearbox, straight teeth, 80 mm diameter, 60:1 reduction, 110 N.m continuous torque, 94% efficiency, IP54 shaft output.","salesMarkdown":"## 80 mm planetary gearbox with 60:1 reduction The GBX0800601002F: Continuous output torque is rated at 110 N.m (973.6 lbf.in) at 100 rpm and 30 °C, with a maximum intermittent torque of 176 N.m (1557.7 lbf.in) under the same conditions. The 94 % efficiency figure means 6 % of input power is lost as heat through the gear mesh. ## Torque, rigidity, and service life at rated speed Torsional rigidity is 6.3 N.m/arcmin — a measure of how much the output shaft twists under load. For positioning applications, the 16 arcmin maximum backlash means the output can lag the input by up to a quarter of a degree before the gear train takes up the slack. Rated service life is 30,000 hours at 100 rpm and 30 °C. The gearbox is lubricated for life, so no maintenance oil changes are needed over that interval. Maximum axial force on the output shaft is 900 N for the full 30,000-hour life, or 1200 N if you accept a 10,000-hour service life. Radial force capacity at mid-span on the output shaft is 650 N for 30,000 hours or 950 N for 10,000 hours, both at 100 rpm and 30 °C. The shaft output seal is rated IP54, so it keeps out dust and splashing water but is not rated for pressurized washdown. ## Obsolete — sourcing through independent channels Schneider Electric lists the GBX0800601002F as obsolete. The gearbox is available through independent surplus and broker channels; quantities are lot-specific and confirmed at RFQ. For a BOM freeze or a replacement on an existing machine, the key fit parameters are the 80 mm housing diameter, the 60:1 ratio, and the 110 N.m continuous torque rating. Any substitute must match the output shaft dimensions and the input interface to avoid a mechanical rework.","metaTitle":"Schneider Electric GBX0800601002F Planetary Gearbox, 60:1","metaDescription":"Schneider Electric GBX0800601002F planetary gearbox, 80 mm diameter, 60:1 reduction, 110 N.m continuous torque, 94% efficiency. Obsolete; sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"60 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"60:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"6.3 N.m/arcmin","Maximum output torque":"1557.7 lbf.in (176 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"1200 N 100 rpm, during 10000 hour at 30°C 900 N 100 rpm, during 30000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"650 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"973.6 lbf.in (110 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"3.1 in (80 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"16 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d6e9db88940336cc2f1b2e586e2a7d74.pdf","sourceUrl":"https://www.se.com/uk/en/product/GBX0800601002F/gearbox-with-straight-teeth-gbx-ø-80-mm-reduction-601-16arcmin-110-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0800601002F/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous torque rating of the GBX0800601002F?","answer":"Continuous output torque is 110 N.m (973.6 lbf.in) at 100 rpm and 30 °C. Maximum intermittent torque is 176 N.m (1557.7 lbf.in) under the same conditions."},{"question":"What is the backlash specification on this gearbox?","answer":"Maximum torsional backlash is 16 arcmin. Torsional rigidity is 6.3 N.m/arcmin, which tells you how much the output shaft deflects per unit of applied torque before the gear train loads up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0800601002F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0800601002F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}