{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0800601003F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0800601003F","canonicalUrl":"https://aoctrl.com/schneider/GBX0800601003F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0800601003F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX0800601003F planetary gearbox, straight teeth, 80 mm diameter, 60:1 reduction, 110 N.m continuous torque, 94% efficiency, IP54 shaft output.","salesMarkdown":"## 60:1 planetary gearbox — 110 N.m continuous, 176 N.m peak The GBX0800601003F is a straight-tooth planetary gearbox from Schneider Electric's GBX series, with an 80 mm outer diameter and a 60:1 reduction ratio. Continuous output torque is 110 N.m at 100 rpm and 30 °C, with a maximum intermittent torque of 176 N.m under the same conditions — the peak figure governs acceleration and emergency stop loads, not steady-state duty. Rated service life is 30,000 hours at 100 rpm and 30 °C; the unit is lubricated for life, so no field re-greasing interval to schedule. ## Backlash, stiffness, and load limits — positioning accuracy constraints Maximum torsional backlash is 16 arc-minutes — this is the lost motion on direction reversal and matters for positioning loops that index or reverse load direction. Torsional rigidity is 6.3 N.m/arcmin, giving the stiffness the servo or stepper sees reflected back to the motor shaft. Maximum axial force on the output shaft is 1200 N at 100 rpm for a 10,000-hour life, derated to 900 N for the full 30,000-hour service life. Maximum radial force applied at mid-shaft is 950 N for 10,000 hours or 650 N for 30,000 hours — these are the limits for belt-drive or overhung load designs. Shaft output seal is rated IP54, so the gearbox handles dust and splash exposure but is not washdown-rated — keep it out of direct spray in food or wet environments. ## Efficiency, noise, and environmental range Efficiency is listed at 94 %, which is typical for a single-stage planetary — the 6 % loss is mostly gear mesh friction and bearing drag, and it sets the heat rejection the mounting surface must handle. Noise level is 60 dB at 1 m, no-load — this is a measured acoustic emission without load-induced gear deflection; expect a few dB higher under full torque. Housing is black anodized aluminium; output shaft is C45 carbon steel — standard for this torque class. The 80 mm body diameter fits common NEMA 34 or 56C motor face patterns with an adapter bracket. ## Sourcing — obsolete, available through independent channels Available through independent surplus and broker channels. No pin-compatible drop-in replacement from Schneider is documented — a substitution would require re-evaluating the mounting interface and torque curve.","metaTitle":"Schneider Electric GBX0800601003F planetary gearbox, 60:1","metaDescription":"Schneider Electric GBX0800601003F planetary gearbox, 60:1 reduction, 110 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"60 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"60:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"6.3 N.m/arcmin","Maximum output torque":"1557.7 lbf.in (176 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"1200 N 100 rpm, during 10000 hour at 30°C 900 N 100 rpm, during 30000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"650 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"973.6 lbf.in (110 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"3.1 in (80 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"16 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1f1914dc1e3da94658dc6c88c2e5a277.pdf","sourceUrl":"https://www.se.com/ca/en/product/GBX0800601003F/gearbox-with-straight-teeth-gbx-ø-80-mm-reduction-601-16arcmin-110-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0800601003F/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous torque rating of GBX0800601003F?","answer":"Continuous output torque is 110 N.m at 100 rpm and 30 °C. Maximum intermittent torque is 176 N.m under the same conditions."},{"question":"What is the backlash specification for this gearbox?","answer":"Maximum torsional backlash is 16 arc-minutes. Torsional rigidity is 6.3 N.m/arcmin."},{"question":"How can I order GBX0800601003F or check availability?","answer":"This obsolete part is sourced to order through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0800601003F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0800601003F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}