{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX0800601404F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX0800601404F","canonicalUrl":"https://aoctrl.com/schneider/GBX0800601404F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX0800601404F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX series planetary gearbox, GBX0800601404F, straight teeth, 60:1 reduction, 110 N.m continuous output torque at 100 rpm, 94% efficiency, IP54 shaft output.","salesMarkdown":"## Planetary gearbox, 60:1 reduction, 110 N.m continuous This GBX0800601404F is a planetary gearbox with straight teeth, 80 mm outer diameter, and a 60:1 reduction ratio. The continuous output torque is 110 N.m (973.6 lbf.in) at 100 rpm and 30 °C, with a maximum output torque of 176 N.m (1557.7 lbf.in) under the same conditions — the margin above continuous gives you headroom for short-duration peak loads, but sustained operation should stay at or below the 110 N.m figure. Efficiency is 94%, which means about 6% of input power is lost as heat in the gear train. That is typical for a single-stage planetary of this precision class, and the lubricated-for-life design means no maintenance schedule for oil changes — the grease fill is sealed for the rated service life. ## Lifecycle status — obsolete, sourced through surplus channels For a line-down situation or a BOM freeze that needs this exact ratio and torque class, the part is available through independent distribution on a quoted-to-order basis. ## Service life and load limits at 100 rpm Rated service life is 30,000 hours at 100 rpm and 30 °C. If your duty cycle runs the gearbox continuously at that speed, that works out to about 3.4 years of 24/7 operation before the internal bearings and gear surfaces reach their wear limit. The maximum axial force (Fa) is 1200 N for a 10,000-hour life target, dropping to 900 N for the full 30,000-hour window. Maximum radial force (Fr) at mid-span on the output shaft is 950 N for 10,000 hours, 650 N for 30,000 hours. Torsional rigidity is 6.3 N.m/arcmin — that is the stiffness figure for the output shaft; a load of 6.3 N.m twists the shaft by one arc-minute. For positioning applications, the maximum torsional backlash is 16 arc-min, which is a moderate figure — fine for conveyor drives or indexing where the load direction is consistent, but not for precision servo positioning where you need single-arc-minute repeatability. ## Environmental and mechanical fit The output shaft carries an IP54 rating — protected against dust ingress and water splashes from any direction. That is suitable for factory-floor environments with occasional washdown or coolant mist, but not for continuous hose-down or submersion. The housing is black anodized aluminium, shaft material is C45 steel. Noise level is 60 dB at 1 m under no-load conditions. That is roughly the sound of a normal conversation — quiet enough for a machine-tool enclosure or a conveyor drive without additional acoustic cladding.","metaTitle":"GBX0800601404F Schneider Electric Planetary Gearbox, 60:1","metaDescription":"GBX0800601404F obsolete planetary gearbox by Schneider Electric. 60:1 ratio, 110 N.m continuous torque at 100 rpm, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"60 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"60:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"6.3 N.m/arcmin","Maximum output torque":"1557.7 lbf.in (176 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"1200 N 100 rpm, during 10000 hour at 30°C 900 N 100 rpm, during 30000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"650 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"973.6 lbf.in (110 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"3.1 in (80 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"16 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7986501d5ec0d9fd60c14793e4c51886.pdf","sourceUrl":"https://www.se.com/uk/en/product/GBX0800601404F/gearbox-with-straight-teeth-gbx-ø-80-mm-reduction-601-16arcmin-110-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX0800601404F/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous output torque of GBX0800601404F?","answer":"110 N.m (973.6 lbf.in) at 100 rpm and 30 °C. The maximum output torque is 176 N.m (1557.7 lbf.in) under the same conditions — use the continuous figure for sustained duty, the maximum for short-duration peaks."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX0800601404F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX0800601404F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}