{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX1200041081D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX1200041081D","canonicalUrl":"https://aoctrl.com/schneider/GBX1200041081D","factsUrl":"https://aoctrl.com/api/mcp/products/GBX1200041081D","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX1200041081D planetary gearbox, straight teeth, 120 mm diameter, 4:1 reduction ratio, 155 N.m continuous torque, 8 arc.min backlash, 96 % efficiency.","salesMarkdown":"## Torque and duty cycle planning The GBX1200041081D: Continuous output torque is 155 N.m, with a maximum of 248 N.m for peak loads. The 4:1 reduction ratio steps motor speed down while multiplying available torque — a 40 N.m motor input yields roughly 155 N.m at the output, minus the 4 % loss from the 96 % efficiency rating. Service life is rated 30,000 hours at 100 rpm and 30 °C ambient. If the application runs above 100 rpm or in a warmer enclosure, derate the continuous torque or accept a shorter service interval — the lubricant is sealed for life, so there is no re-grease path. Maximum radial force on the output shaft is 1500 N at 100 rpm for the full 30,000-hour life, or 2000 N if you accept a 10,000-hour service life. Axial force limits follow the same pattern: 2100 N for 30,000 hours, 2800 N for 10,000 hours. Overhung loads from belt drives or pinions need to stay within these envelopes to avoid bearing fatigue. ## Backlash and positioning accuracy Maximum torsional backlash is 8 arc.min — typical for a straight-tooth planetary at this price and torque class. If the application indexes or reverses direction under load, that 8 arc.min of lost motion appears as position error at the output. For precision indexing, a helical or low-backlash variant would be needed, but for general conveyor or rotary-table positioning this is acceptable. Torsional rigidity is 12 N.m/arcmin, meaning the gearbox twists 1 arcmin for every 12 N.m of applied torque. This stiffness affects resonance frequency in servo applications — keep the reflected inertia ratio (load inertia / motor inertia) within the servo drive's tuning range to avoid oscillation. ## Mounting and environmental fit The 120 mm diameter black anodized aluminium housing mounts in any position — vertical, horizontal, or upside-down — with no oil drain or breather to orient. Shaft output is IP54, so the gearbox handles dust and splash but not washdown. The C45 steel output shaft is standard for this torque class; if the application runs in a corrosive atmosphere, plan for shaft sealing or stainless alternatives. Ambient operating range is -25 to 90 °C. The lifetime lubricant is rated for this band, but sustained operation near the 90 °C ceiling will reduce the 30,000-hour service life — the grease degrades faster above 70 °C. Noise level is 65 dB at 1 m, no-load, which is quiet enough for most production areas without acoustic enclosures. ## Lifecycle and sourcing Schneider Electric lists the GBX1200041081D as obsolete. For BOM positions that call this exact order code, supply runs through independent surplus and broker channels — quantities are lot-specific and confirmed at RFQ time. If the application can tolerate a different frame size or backlash class, a current-production planetary from the same GBX family may fit the bolt pattern and shaft dimensions, but no pin-compatible drop-in replacement is documented. Validate the mounting interface and torque envelope before committing to a substitute.","metaTitle":"Schneider Electric GBX1200041081D Planetary Gearbox, 4:1","metaDescription":"Schneider Electric GBX1200041081D planetary gearbox, 4:1 reduction, 155 N.m continuous torque, 96% efficiency. Obsolete — sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"96 %","Noise level":"65 dB at 1 m, no-load","Gear box type":"Straight teeth","Housing colour":"Black","Shaft material":"C 45","Reduction ratio":"4:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Moment Of Inertia":"1.79 g.cm²","Mounting position":"Any position","Compatibility code":"GBX","Torsional rigidity":"12 N.m/arcmin","Maximum output torque":"248 N.m","Service life in hours":"30000 h at 100 rpm at 30 °C","Additional information":"Lubricated for life","Maximum axial force Fa":"2100 N at 100 rpm, during 30000 hour at 30°C 2800 N at 100 rpm, during 10000 hour at 30°C","IP degree of protection":"Shaft output: IP54","Maximum radial force Fr":"1500 N at 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 2000 N at 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"155 N.m","Gearbox external diameter":"120 mm","Product or component type":"Planetary gearbox","Maximum torsional backlash":"8 arc.min","Ambient Temperature For Operation":"-25...90 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/468e7a1ebf61f246e35eb0193788e51d.pdf","sourceUrl":"https://www.se.com/ie/en/product/GBX1200041081D/gearbox-with-straight-teeth-gbx-ø-120-mm-reduction-41-8arcmin-155-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX1200041081D/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous torque rating of GBX1200041081D?","answer":"155 N.m continuous, with a maximum peak torque of 248 N.m. The 4:1 reduction ratio and 96 % efficiency mean the input torque requirement is roughly 40 N.m to achieve the continuous output rating."},{"question":"What is the backlash on this gearbox?","answer":"Maximum torsional backlash is 8 arc.min. This is typical for a straight-tooth planetary at this torque level. For reversing or indexing applications, account for this lost motion in the positioning budget."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX1200041081D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX1200041081D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}