{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX1200090703F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX1200090703F","canonicalUrl":"https://aoctrl.com/schneider/GBX1200090703F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX1200090703F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX1200090703F planetary gearbox, straight teeth, 120 mm diameter, 9:1 reduction ratio, 210 N.m continuous torque, 12 arcmin backlash, IP54 shaft output.","salesMarkdown":"## Obsolete — sourcing through surplus channels The GBX1200090703F: Quantities are lot-specific and confirmed at RFQ. ## 9:1 reduction, 210 N.m continuous — what the ratings deliver The 9:1 reduction ratio drops input speed by a factor of nine while multiplying torque. Continuous output torque is 210 N.m at 100 rpm and 30 °C — this is the sustained load the gearbox can carry without exceeding its 30,000-hour service life. Maximum output torque hits 336 N.m at the same speed and temperature, covering short-duration peak loads. Efficiency is listed at 94 % — about 6 % of input power is lost as heat inside the housing. For a motor driving this gearbox at full rated torque, that heat stays within the black anodized aluminium housing without external cooling, as long as ambient stays between -25 and 90 °C. Maximum torsional backlash is 12 arc.min — the angular play between input and output when reversing direction. This is a standard-precision planetary; for indexing or positioning applications that need tighter repeatability, a lower-backlash series would be needed. ## Mounting and mechanical limits The gearbox has a 120 mm external diameter and a straight-tooth planetary design. Shaft output carries an IP54 rating — protected against dust ingress and splashing water, but not submersion or high-pressure washdown. The shaft is C45 steel; the housing is black anodized aluminium. Maximum radial force Fr is 1500 N at 100 rpm for the 30,000-hour life target, applied at mid-distance from the output shaft. Maximum axial force Fa is 2100 N under the same conditions. Exceeding these loads shortens bearing life below the rated 30,000 hours. The gearbox ships lubricated for life — no oil changes or regreasing intervals. Noise level is 65 dB at 1 m under no-load conditions, which is quiet enough for most production-floor environments without an enclosure.","metaTitle":"Schneider GBX1200090703F Planetary Gearbox, 9:1, 210 N.m","metaDescription":"Schneider Electric GBX1200090703F planetary gearbox, 9:1 reduction, 210 N.m continuous torque, 94% efficiency.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"65 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"9:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"13 N.m/arcmin","Maximum output torque":"2973.8 lbf.in (336 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"2100 N 100 rpm, during 30000 hour at 30°C 2800 N 100 rpm, during 10000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"1500 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 2000 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"1858.7 lbf.in (210 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"4.7 in (120 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"12 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a288aa63f2eabfdced916d78733add6f.pdf","sourceUrl":"https://www.se.com/ca/en/product/GBX1200090703F/gearbox-with-straight-teeth-gbx-ø-120-mm-reduction-91-12arcmin-210-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX1200090703F/alternatives.json"},"ai":{"faq":[{"question":"What is GBX1200090703F's continuous torque rating?","answer":"Continuous output torque is 210 N.m (1858.7 lbf.in) at 100 rpm and 30 °C. Maximum output torque is 336 N.m (2973.8 lbf.in) under the same conditions, covering peak loads within the 30,000-hour service life."},{"question":"What is the noise level of this gearbox?","answer":"Noise level is 65 dB measured at 1 m under no-load conditions. This is a standard figure for a straight-tooth planetary of this size class."},{"question":"How can I order GBX1200090703F or check availability?","answer":"This obsolete part is sourced through independent distribution channels. No stock-holding claim is made — each lot is verified against the specific request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX1200090703F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX1200090703F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}