{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GBX1200150703F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GBX1200150703F","canonicalUrl":"https://aoctrl.com/schneider/GBX1200150703F","factsUrl":"https://aoctrl.com/api/mcp/products/GBX1200150703F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric GBX1200150703F planetary gearbox, straight teeth, 120 mm diameter, 15:1 reduction, 12 arcmin backlash, 230 N.m continuous torque, 368 N.m peak, IP54 shaft output.","salesMarkdown":"## Planetary gearbox with straight teeth — 15:1 reduction, 230 N.m continuous The GBX1200150703F is a straight-tooth planetary gearbox from Schneider Electric's GBX series, 120 mm diameter, with a 15:1 reduction ratio. It delivers a continuous output torque of 230 N.m at 100 rpm and a maximum output torque of 368 N.m for peak overload events. Rated service life is 30000 hours at 100 rpm and 30 °C ambient — the bearing and gear life are specified at this duty point. The gearbox is lubricated for life, eliminating periodic oil changes in service. ## Torque, stiffness, and backlash — what governs load fit Continuous torque (230 N.m) is the rating that sizes the gearbox for steady-state operation; the maximum torque (368 N.m) covers acceleration peaks and momentary overloads. Torsional rigidity is 13 N.m/arcmin — a measure of how much the output shaft twists under load, relevant for positioning accuracy in indexing applications. Maximum torsional backlash is 12 arc.min — the angular play between input and output when reversing direction. For a 15:1 ratio this translates to about 0.8 arc.min at the input, typical for a straight-tooth planetary stage without preloading. Efficiency is 94 % — the remaining 6 % is dissipated as heat inside the housing. Noise level at 1 m under no-load is 65 dB, which is moderate for a planetary of this size. ## Mechanical limits — shaft loads, temperature, and seal rating Maximum axial force on the output shaft is 2100 N for a 30000-hour life, or 2800 N for a 10000-hour life at 100 rpm. Maximum radial force (overhung load) is 1500 N at 30000 hours or 2000 N at 10000 hours, measured at the midpoint of the output shaft. Exceeding these reduces bearing life below the stated service hours. Ambient temperature range for operation is -25 to 90 °C. The shaft output seal carries an IP54 rating — protected against dust ingress and splashing water at the seal face, not submersible. The housing is black anodized aluminium; the shaft is C45 steel. ## Lifecycle status — obsolete, sourced through independent channels Schneider Electric has marked the GBX1200150703F as obsolete. No direct replacement or successor part number is published. For a line-down or BOM fill, the unit is available through independent surplus and broker channels — quantities are lot-specific and confirmed at RFQ. No stock-holding claim is made; the supply posture is quoted-to-order through distribution channels that carry legacy Schneider gearbox inventory.","metaTitle":"Schneider Electric GBX1200150703F Planetary Gearbox, 15:1","metaDescription":"Schneider Electric GBX1200150703F planetary gearbox, 15:1 ratio, 230 N.m continuous torque, 94% efficiency. Obsolete — sourced to order. RFQ for availability.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Gear Reducers & Gearboxes"],"specifications":{"Efficiency":"94 %","Noise level":"65 dB 1 m, no-load","Gear box type":"Straight teeth","Housing Colour":"Black","Shaft material":"C 45","Reduction ratio":"15:1","lifecycle_stage":"current","Housing material":"Black anodized aluminium","Device short name":"GBX","Compatibility code":"GBX","Torsional rigidity":"13 N.m/arcmin","Maximum output torque":"3257.07 lbf.in (368 N.m) 100 rpm 86 °F (30 °C)","Nbr. of units in pkg.":"1","Service life in hours":"30000 h 100 rpm 86 °F (30 °C)","Additional information":"Lubricated for life","Maximum axial force Fa":"2100 N 100 rpm, during 30000 hour at 30°C 2800 N 100 rpm, during 10000 hour at 30°C","IP Degree of Protection":"Shaft output IP54","Maximum radial force Fr":"1500 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 2000 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C","Continuous output torque":"2035.7 lbf.in (230 N.m) 100 rpm 86 °F (30 °C)","Gearbox external diameter":"4.7 in (120 mm)","Product or Component Type":"Planetary gearbox","Maximum torsional backlash":"12 arc.min","Ambient Temperature For Operation":"-13...194 °F (-25...90 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/709803807160a60e27e113a117dd59fc.pdf","sourceUrl":"https://www.se.com/nz/en/product/GBX1200150703F/gearbox-with-straight-teeth-gbx-ø-120-mm-reduction-151-12arcmin-230-n-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/GBX1200150703F/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GBX1200150703F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GBX1200150703F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}