{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GS1ANT22G","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"GS1ANT22G","canonicalUrl":"https://aoctrl.com/schneider/GS1ANT22G","factsUrl":"https://aoctrl.com/api/mcp/products/GS1ANT22G","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys GS1AN series, auxiliary contact block GS1ANT22G, 2NO + 2NC instantaneous, 20 A Ith, right-side mounting for GS2 with left handle test position.","salesMarkdown":"The Schneider Electric GS1ANT22G is an auxiliary contact block from the TeSys GS range, designed as a right-side add-on for the GS2 switch-disconnector when it's fitted with a left-side external handle. Its conventional free-air thermal current (Ith) is rated at 20 A at 40 °C, which is the thermal limit for the contact block itself in open air. What actually governs your circuit design is the rated operational current (Ie) under specific duty categories: for AC-15 (solenoid, electromagnetic load) it handles 10 A at 230 V, 8 A at 400/415 V, and 6 A at 440 V. For DC-13 (solenoid with parallel diode suppression) it's rated 4 A at 48 V, 1.2 A at 110 V, and 1 A at 220 V DC. The GS1ANT22G mounts on the right side of a GS2 switch-disconnector that already has a left-side external handle. It's a clip-on addition, no extra wiring to the main switch poles — the contacts are mechanically driven by the switch's internal mechanism. The instantaneous contact operation means there's no delay; the NO and NC change state as soon as the handle moves. The contacts are rated for 30,000 electrical cycles under AC-15 duty and 30,000 mechanical cycles, so it's built for the same service life as the switch it's attached to. If you're wiring it into a 24 VDC control circuit, pay attention to the DC-13 ratings — at 24 V it'll comfortably handle the typical relay and PLC input draw, but the 1 A at 220 V DC rating tells you this isn't meant for heavy DC motor braking or large DC solenoids. The 20 A Ith rating is the thermal current the block can carry continuously in free air at 40 °C — think of it as the wiring limit for the terminal block itself. The AC-15 and DC-13 ratings are the ones that matter for switching inductive loads like contactor coils, solenoid valves, or small relays. AC-15 specifically covers electromagnetic loads with high inrush (like a contactor coil pulling in), so if you're using this to signal a contactor's status back to a PLC, the 10 A at 230 V AC-15 rating gives you plenty of headroom. The fuse type listed is NFC BS DIN — that's the standard for the fuse holder or fuse type the switch-disconnector itself accepts, not a rating of the contact block. It tells you the GS2 switch body this attaches to is designed for NFC (French), BS (British), or DIN (German) standard fuses, which covers most common fuse formats in industrial panels.","metaTitle":"Schneider Electric GS1ANT22G TeSys auxiliary contact, 2NO+2N","metaDescription":"Schneider Electric GS1ANT22G TeSys GS auxiliary contact block, 2NO+2NC instantaneous contacts, 20A Ith, rated for AC-15/DC-13 duty. Active production. Right-side mount for GS2 swit","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Auxiliary Contacts"],"specifications":{"title":"GS1ANT22G","Fuse type":"NFC BS DIN","description":"Auxiliary contacts, TeSys GS, 2NC + 2NO, instantaneous, right side mounting, for GS2 with left handle test position","lifecycle_stage":"current","Range of product":"TeSys","Contact operation":"Instantaneous","Device short name":"GS1AN","Contact application":"O, I and test position signalling","Switch Rated Current":"315 A 400 A 125 A 250 A 160 A 100 A 60 A 200 A 50 A 63 A","Electrical durability":"30000 cycles AC-15","Mechanical durability":"30000 cycles","Type of operating handle":"External left side","Product or component type":"Auxiliary contact","Contacts type and composition":"2 NO + 2 NC","[Ie] rated operational current":"1 A at 220 V DC-13 10 A at 230 V AC-15 12 A at 127 V AC-15 4 A at 48 V DC-13 6 A at 440 V AC-15 8 A at 400/415 V AC-15 1.2 A at 110 V DC-13","[Ith] conventional free air thermal current":"20 A (at 40 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2a4b3367cb35567cdb1715835500e488.pdf","sourceUrl":"https://www.se.com/mk/en/product/GS1ANT22G/auxiliary-contacts-tesys-gs-2nc-+-2no-instantaneous-right-side-mounting-for-gs2-with-left-handle-test-position/"},"ai":{"faq":[{"question":"What are the key ratings I need to check for fit?","answer":"The conventional free-air thermal current (Ith) is 20 A at 40 °C. For AC-15 duty, it's rated 10 A at 230 V, 8 A at 400/415 V, and 6 A at 440 V. For DC-13, it's 4 A at 48 V, 1.2 A at 110 V, and 1 A at 220 V DC. The contact composition is 2NO + 2NC instantaneous."},{"question":"What fuse type does this part use?","answer":"The listed fuse type is NFC BS DIN, which refers to the standard for the fuse holder on the GS2 switch-disconnector this contact block mounts to. It accepts NFC (French), BS (British), and DIN (German) standard fuse formats."},{"question":"How do I source the GS1ANT22G?","answer":"Since it's an active-production part, the standard sourcing route is an RFQ through distribution. It quotes to order — no need to search surplus or broker channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/GS1ANT22G","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/GS1ANT22G when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}