{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"GT2710-VTWD","brand":"Mitsubishi Electric","brandSlug":"mitsubishi","productSlug":"GT2710-VTWD","canonicalUrl":"https://aoctrl.com/mitsubishi/GT2710-VTWD","factsUrl":"https://aoctrl.com/api/mcp/products/GT2710-VTWD","rawCanonicalId":null},"summary":{"shortDescription":"Mitsubishi GOT2000 series, GT2710-VTWD, 10.4-inch TFT color VGA display, 640×480 dots, 24VDC power supply, white frame, self-cooling.","salesMarkdown":"## Panel-fit and installation notes The GT2710-VTWD is a 10.4-inch TFT color VGA HMI from the Mitsubishi GOT2000 series, running at 640×480 dots. The white frame (designated 'W') is a cosmetic identifier; the cutout and mounting pattern are consistent across frame colors for this screen size. External dimensions are 30.3 cm wide × 21.8 cm high × 5.2 cm deep, and the unit is designed for inside-control-panel mounting. The spec sheet lists a permissible instantaneous failure time of 10 ms — the power supply must ride through shorter dips or the HMI resets. Terminal block torque is 0.5–0.8 N·m for M3 clamp screws; applicable wire size is 0.75 to 2 mm². The clamp terminal accepts RAV1.25-3, V2-S3.3, V2-N3A, and FV2-N3A lugs. ## Power supply and environment Rated input is 24 VDC with a tolerance of +25%/–20%. Inrush current is 5 A or less for 20 ms at 25°C under maximum load. Typical standalone draw is 15 W; with backlight off it drops to 8 W; maximum load is 42 W — size the 24 VDC supply for at least the inrush transient plus steady-state load of downstream devices. Operating ambient temperature is 0–55°C horizontally mounted, derated to 0–50°C vertically. Storage range is –20°C to 60°C. Humidity tolerance is 10–90% RH without condensation. Altitude is limited to 2000 m (6562 ft) — above that, derating may be required though not explicitly stated. Rated for Pollution Degree 2, Overvoltage Category II, meaning this HMI is intended for a clean, dry, indoor electrical environment inside a control panel — not outdoors, not near the line side. The noise resistance figure (500 Vp-p, 1 µs width) gives a baseline for conducted immunity; the installation location must avoid greasy fumes, corrosive gas, and conductive dust. Withstand voltage is 350 VAC for 1 minute between power terminal and ground; insulation resistance is 10 MΩ or higher at 500 VDC — both figures are bench-test limits, not normal operating conditions, but they set a floor for isolation quality. ## Comparison to the GT2507-WTBD The GT2507-WTBD also uses 24 VDC, but its power draw is lower (not specified here). If you have an existing cutout for the smaller model, the GT2710-VTWD will not fit without sheet-metal modification. Sourcing is straightforward: the unit is quoted to order against your BOM line. Lead time for a single unit typically falls within 1–10 working days, volume orders may require a factory schedule check.","metaTitle":"Mitsubishi GT2710-VTWD GOT2000, 10.4\" TFT VGA, white","metaDescription":"Active Mitsubishi GT2710-VTWD GOT2000 10.4\" TFT VGA HMI, 640×480, 24VDC, 42W max, white frame. Panel-mount, self-cooled. Sourced to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["HMI Operator Interfaces"],"specifications":{"title":"GT2710-VTWD","Resolution":"V = VGA (640 x 480)","Frame Color":"W = White","Product No.":"GT2710-VTWD","Screen size":"10 = 10.4\" or 10.1\"","Stand Alone":"15 W","description":"The Mitsubishi GT2710-VTWD is a GOT2000 series 10.4-inch graphic operation terminal equipped with a TFT color VGA display (640 x 480 dots), 24VDC power supply with ±25%/−20% tolerance, and clamp terminals for M3 screw connections. Dimensions measure 30.3 x 21.8 x 5.2 cm, with maximum power consumption of 42 W and self-cooling design for panel mounting inside industrial enclosures. Operating range spans −20°C to 60°C with 0.5 to 0.8 N·m torque specification.","Display Type":"T = TFT Color","Maximum Load":"42W or less","Power Supply":"D = 24VDC","Product Type":"Advanced Model with Multi-Touch Gesture Functions","Clamp Terminal":"Clamp terminals for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A","Cooling Method":"Self-cooling","Inrush Current":"5A or less (20ms, ambient temperature 25°C, maximum load)","Shipping Weight":"8 Kg Kg","lifecycle_stage":"current","Noise Resistance":"Noise voltage 500Vp-p, noise width 1µs by noise simulator with noise frequency 25 to 60Hz","Pollution Degree":"2 or less","Impact Resistance":"Compliant with JIS B 3502, IEC 61131-2 (147 m/s² (15G), 3 times each in X, Y and Z directions)","Withstand Voltage":"350VAC for 1 minute between power supply terminal and ground","Operating Altitude":"2000m (6562 ft) or less","Estimated Lead Time":"Usually ships in 1-10 working days.","Applicable Wire Size":"0.75 to 2 [mm²]","Operating Atmosphere":"No greasy fumes, corrosive gas, flammable gas, excessive conductive dust, and direct sunlight (as well as at storage)","Overvoltage Category":"II or less","Installation Location":"Inside control panel","Insulation Resistance":"10MO or higher with an insulation resistance tester (500VDC between power supply terminal and ground)","Operating Ambient Temp.":"0 to 55°C (*2) 0 to 55°C (horizontal installation), 0 to 50°C (vertical installation)","Storage Ambient Humidity":"10 to 90%RH, no condensation","Input Power Supply Voltage":"24VDC (+25%, -20%)","Operating Ambient Humidity":"10 to 90%RH, no condensation 10 to 90%RH, no condensation","Stand Alone w/Backlight Off":"8 W","Storage Ambient Temperature":"-20°C to 60°C","External Dimensions ( W x H x D )":"30.3 cm x 21.8 cm x 5.2 cm","Weight Excludes Mounting Brackets":"2.1 Kg","Permissible Instantaneous Failure Time":"Within 10ms","Tightening Torque (Terminal Block’s Terminal Screws)":"0.5 to 0.8 [N.m]"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,898.65 – $2,588.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b473b8b9fb39644319be9775c588256c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the resolution of the GT2710-VTWD?","answer":"VGA (640 × 480 dots) on a 10.4-inch TFT color display."},{"question":"What frame color does the GT2710-VTWD have?","answer":"White, indicated by the 'W' in the order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/mitsubishi/GT2710-VTWD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/mitsubishi/GT2710-VTWD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}