{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILA2P572TB1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILA2P572TB1A0","canonicalUrl":"https://aoctrl.com/schneider/ILA2P572TB1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILA2P572TB1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium integrated drive ILA2P572TB1A0, AC synchronous servo motor, single-phase DC bus, 0.57 N.m nominal torque, 3000 rpm, flange mount, 57 mm flange.","salesMarkdown":"## Form factor: 57 mm flange, 6.4 in long, untapped 9 mm shaft The ILA2P572TB1A0 is a Lexium integrated drive ILA-series AC synchronous servo motor built around a 57 mm motor flange, 163.8 mm long overall, with a 9 mm untapped shaft running 20 mm out of the housing face and a 1.6 mm centring collar depth — a small-frame drop-in sized for compact motion axes. It mounts by flange only, ships without a gearbox and without a holding brake, and the second-shaft end is blank — the BOM line is the bare motor, not a pre-configured geared or braked variant. ## Torque-speed envelope at 24 V and 48 V bus Nominal torque is 0.57 N.m (5.04 lbf.in) and peak stall torque reaches 0.85 N.m (7.52 lbf.in) — that is the headroom a sizing calc budgets for accel/decel transients, not the continuous working point. Nominal speed is 3000 rpm at 24 V supply and 5100 rpm at 48 V supply, so the higher bus voltage gives you roughly 70 % more top-end speed on the same winding — pick the supply rail first, then size the mechanical envelope. Continuous current draw tops out at 7500 mA with a 9000 mA peak, against supply voltage limits of 18–55.2 V — keep the upstream DC bus regulated inside that window or the integrated drive drops out. ## Feedback, rotor, and electrical hookup Feedback is a single-turn encoder with ±0.05° accuracy error and a 6-pole rotor, which is enough resolution for point-to-point positioning without pushing into absolute multi-turn territory — fine for index tables and small conveyors, not for full cam profiling. Bus speed is 100 Mbits — plan the topology around that ceiling, and remember it is natural-convection cooled, so leave clearance around the housing for the thermal path or the bearing life number is the first thing that goes. ## Built-in protection, standards, and field environment The drive stage carries output-voltage overload, safe torque off, and output short-circuit protection — STO is the one that matters most for guarding, because it kills torque without cutting the bus, and the standard list (EN 50347, EN/IEC 50178, EN/IEC 61800-3 second environment, IEC 60072-1) covers the CE-marked machine-side approval path. Mechanical robustness is rated at 150 m/s² shock (1000 shocks, EN/IEC 60068-2-29) and 20 m/s² vibration over 10–500 Hz, with operating humidity at 15–85 % non-condensing and altitude to 1000 m without derating — it is built for an enclosure on the machine, not a cleanroom. Lifecycle status on file for the ILA2P572TB1A0 is listed as current — no discontinuation or NRND notice is on the record for this MPN.","metaTitle":"Schneider ILA2P572TB1A0 Servo Motor, 0.57 N.m, 3000 rpm","metaDescription":"Schneider Electric ILA2P572TB1A0 Lexium integrated drive AC servo, single-phase DC bus, 0.57 N.m nominal, 24/48 V supply, flange mount.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","title":"ILA2P572TB1A0","Length":"6.4 in (163.8 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN 50347 EN 61800-3 : 2001-02 EN/IEC 50178 EN 61800-3:2001, second environment EN/IEC 61800-3 IEC 61800-3, Ed 2 IEC 60072-1","Motor Type":"AC Synchronous Servo Motor","description":"integrated drive ILA with servo motor - 24..48 V - Ethernet Powerlink - PCB conn","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"0.8 in (20 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Single turn encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"3000 rpm 24 V 5100 rpm 48 V","Rotor inertia":"0.173 kg.cm²","Accuracy error":"+/- 0.05 °","Nominal torque":"5.04 lbf.in (0.57 N.m)","Shaft diameter":"0.4 in (9 mm)","Protection Type":"Overload of output voltage Safe torque off Short circuit of the output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILA","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.2 in (57 mm)","Peak stall torque":"7.52 lbf.in (0.85 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7500 mA maximum continuous 9000 mA peak","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.06 in (1.6 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"104 N force pressure) 104 N tensile force)","Number of motor stacks":"2","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"5.04 lbf.in (0.57 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"107 N","Mounting holes diameter":"0.2 in (5.2 mm)","Centring collar diameter":"2.0 in (50 mm)","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"16384 points/turn","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.6 in (66.6 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0aec7855cc539d59bb9ca9b8812d8957.pdf","sourceUrl":"https://www.se.com/ie/en/product/ILA2P572TB1A0/integrated-drive-ila-with-servo-motor-24-48-v-ethernet-powerlink-pcb-conn/"},"ai":{"faq":[{"question":"What is ILA2P572TB1A0's listed phase on this servo motor line?","answer":"The ILA2P572TB1A0 is listed as single-phase on the network side, feeding a DC bus that powers the integrated drive — the AC supply is single-phase, the internal link the motor runs from is DC."},{"question":"What is ILA2P572TB1A0's listed length on this Servo Motors with Brake line?","answer":"Overall length is 6.4 in (163.8 mm) for the bare motor — without a gearbox or holding brake, since this part ships with neither fitted."},{"question":"What compliance documentation does Schneider Electric list for ILA2P572TB1A0?","answer":"Marking is CE, with the standards list naming EN 50347, EN/IEC 50178, EN/IEC 61800-3 (second environment, Ed 2), and IEC 60072-1 — that's the machine-side EMC and dimensioning conformance bundle for an EU-installed axis."},{"question":"How is ILA2P572TB1A0 quoted for volume purchases?","answer":"No stock count or price is published here — those come back with the quote."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILA2P572TB1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILA2P572TB1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}