{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILA2P572TB2A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILA2P572TB2A0","canonicalUrl":"https://aoctrl.com/schneider/ILA2P572TB2A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILA2P572TB2A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium integrated drive ILA2P572TB2A0, AC synchronous servo motor, 0.57 N.m nominal at 3000 rpm, 57 mm flange, DC bus 18-55.2 V, multi-turn encoder, CE marked.","salesMarkdown":"## What the ILA2P572TB2A0 puts on the shaft The ILA2P572TB2A0 is a Lexium integrated drive from the ILA family — an AC synchronous servo motor with the drive electronics co-packaged in the housing, so the only thing reaching the cabinet is the DC bus and a ribbon of digital I/O. That co-packaged format is the whole point of the family: one part number covers the motor, the encoder, and the servo amplifier, which keeps panel build down to a flange mount and a connector. Continuous torque is 0.57 N.m (5.04 lbf.in) at 3000 rpm nominal on 24 V, with a peak stall of 0.85 N.m (7.52 lbf.in). On 48 V the constant-power speed range stretches to 5100 rpm, so the same motor covers both a low-speed high-torque indexing duty and a higher-speed spindle feed without a gearbox. Current draw is 7500 mA continuous, 9000 mA peak — useful when sizing the upstream 24 V or 48 V supply and the fusing on the DC bus. The supply envelope of 18 to 55.2 V lets the same part run from a 24 V industrial rail or a 48 V motion bus. ## Mechanical fit and feedback The motor flange is 57 mm, with a 9 mm untapped shaft 20 mm long and a 1.6 mm centring collar depth. Untapped shaft means the coupling is set-screw or clamp-style — no tapped retainer to chase when the customer specs a non-standard pinion or pulley. Electrical interface is a printed circuit board connector with four configurable signal lines, each usable as input or output. Transmission rate is 100 Mbits for the fieldbus slice, so the network side is fast enough for cyclic setpoints without becoming a bottleneck on a multi-axis machine. ## Protections, environment, and compliance Built-in protection covers short circuit of the output voltage, safe torque off, and overload of the output voltage — the STO function in particular matters where the drive sits inside a safety circuit, since it removes torque without cutting the DC bus. Cooling is natural convection, so there is no fan to fail and no fan-induced dust path into the electronics. The unit is CE marked and tested to the EN 61800-3 / IEC 61800-3 drive standards, plus EN/IEC 50178, EN 50347, and IEC 60072-1 for the motor side. Mechanical endurance is 20000 hours bearing life, with shock resistance 150 m/s² for 1000 shocks and vibration 20 m/s² across 10 to 500 Hz. That floor suits general-purpose automation — packaging conveyors, small indexing tables, lab automation — rather than heavy-press adjacent mounts where higher-g shock is the norm. ## Lifecycle read and how to source it Lifecycle stage reads as current on the manufacturer record, so the ILA2P572TB2A0 is not on a phase-out list — but it ships through independent distribution and is quoted against an RFQ rather than off the shelf of a catalog reseller. For a one-off spare or a BOM line that needs a known lead time, the practical move is to specify the exact order code into the RFQ so the supply side confirms price, lead time, and traceability against the manufacturer record before the PO closes.","metaTitle":"Schneider ILA2P572TB2A0 Lexium Integrated Drive, 0.57 N.m","metaDescription":"Schneider Electric ILA2P572TB2A0 Lexium integrated drive servo motor: 0.57 N.m nominal, 3000 rpm, multi-turn encoder, 18-55.2 V DC bus.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","title":"ILA2P572TB2A0","Length":"8.2 in (207.8 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN 61800-3 : 2001-02 IEC 61800-3, Ed 2 EN/IEC 50178 IEC 60072-1 EN/IEC 61800-3 EN 50347 EN 61800-3:2001, second environment","Motor Type":"AC Synchronous Servo Motor","description":"integrated drive ILA with servo motor - 24..48 V - Ethernet Powerlink - PCB conn","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"0.8 in (20 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Multi turn encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"3000 rpm 24 V 5100 rpm 48 V","Rotor inertia":"0.173 kg.cm²","Accuracy error":"+/- 0.05 °","Nominal torque":"5.04 lbf.in (0.57 N.m)","Shaft diameter":"0.4 in (9 mm)","Protection Type":"Short circuit of the output voltage Safe torque off Overload of output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILA","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.2 in (57 mm)","Peak stall torque":"7.52 lbf.in (0.85 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7500 mA maximum continuous 9000 mA peak","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.06 in (1.6 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"104 N force pressure) 104 N tensile force)","Number of motor stacks":"2","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"5.04 lbf.in (0.57 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"107 N","Mounting holes diameter":"0.2 in (5.2 mm)","Centring collar diameter":"2.0 in (50 mm)","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"16384 points/turn x 4096 turns","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.6 in (66.6 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/552e8d413ffad277c5246aaa40944db1.pdf","sourceUrl":"https://www.se.com/us/en/product/ILA2P572TB2A0/integrated-drive-ila-with-servo-motor-24-48-v-ethernet-powerlink-pcb-conn/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for the ILA2P572TB2A0?","answer":"The standard route is to send the order code in an RFQ so the desk can confirm price and lead time against current supply. No distributor shelf count or ships-today claim is implied — the part is specified into the BOM and quoted per request."},{"question":"What is the ILA2P572TB2A0's listed phase on this servo motor line?","answer":"The spec lists phase as single phase, with the network type on the drive side given as DC. The supply limits of 18 to 55.2 V confirm a DC bus feed rather than a mains AC input at the motor."},{"question":"What compliance documentation does Schneider Electric provide for the ILA2P572TB2A0?","answer":"The unit carries the CE mark and is designed to EN 61800-3 / IEC 61800-3 for drives, EN/IEC 50178, EN 50347, and IEC 60072-1 for the motor. Declarations and test reports are pulled from the manufacturer record on request at RFQ time — RoHS, REACH, and full CE technical file are the usual document pack a maintenance buyer asks for first."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILA2P572TB2A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILA2P572TB2A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}