{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILA2P572TC1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILA2P572TC1A0","canonicalUrl":"https://aoctrl.com/schneider/ILA2P572TC1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILA2P572TC1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium ILA integrated drive servo, single phase AC synchronous, 0.57 N·m nominal at 3000 rpm, 9 mm shaft, 57 mm flange, ILA2P572TC1A0.","salesMarkdown":"## Integrator note — what this ILA does on the line The Schneider ILA2P572TC1A0 is an AC synchronous servo motor in the Lexium integrated drive line, sized at 0.57 N·m nominal torque with a 0.85 N·m peak stall — a low-inertia package for point-to-point motion and small indexing axes rather than high-load continuous drives. It runs on an 18 to 55.2 V supply at 7500 mA continuous and 9000 mA peak, with nominal speed rated 3000 rpm at 24 V and 5100 rpm at 48 V — the bus voltage choice is what sets the available speed window for the axis. The device short name is ILA, part of the Lexium integrated drive range — meaning the drive electronics sit in the same housing as the motor, so cabinet integration collapses to the flange mount, the industrial connector, and a DC bus link rather than a separate drive chassis. It carries a single-turn encoder feedback, four configurable I/O signals, natural convection cooling, and protection against output overvoltage, output short circuit, and safe torque off — the latter is the STO function expected on a Lexium drive for guarded commissioning. ## Mechanical envelope and mount The flange is 57 mm with an untapped 9 mm shaft at 20 mm length and a 1.6 mm centring collar — the motor bolts directly to the machine plate and takes a keyed coupling or pinion on the shaft end. Overall length is 163.8 mm including the integrated drive housing, so on a machine layout the ILA needs that much axial clearance behind the flange for cable bend and connector access. Power and feedback come in through an industrial connector — wiring the unit is a single-cordset job rather than a separate power, feedback, and brake loom. ## Compliance and sourcing posture Compliance carries CE marking against EN 61800-3 second environment, EN/IEC 50178, IEC 60072-1 and EN 50347 — the second-environment EMC classification is the one expected for installation inside an industrial machine, not for exposed commercial spaces.","metaTitle":"Schneider ILA2P572TC1A0 Lexium Servo, 0.57 N·m, 3000 rpm","metaDescription":"Schneider Electric ILA2P572TC1A0 Lexium integrated drive servo, single phase, 0.57 N·m nominal at 3000 rpm. Active production, quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Single phase","Length":"6.4 in (163.8 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN 61800-3:2001, second environment EN 61800-3 : 2001-02 EN/IEC 50178 IEC 61800-3, Ed 2 EN 50347 EN/IEC 61800-3 IEC 60072-1","Motor Type":"AC Synchronous Servo Motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"0.8 in (20 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Single turn encoder","Gear box type":"Without","Holding brake":"Without","Nominal speed":"3000 rpm 24 V 5100 rpm 48 V","Rotor inertia":"0.173 kg.cm²","Accuracy error":"+/- 0.05 °","Nominal torque":"5.04 lbf.in (0.57 N.m)","Shaft diameter":"0.4 in (9 mm)","Protection Type":"Overload of output voltage Safe torque off Short circuit of the output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILA","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"2.2 in (57 mm)","Peak stall torque":"7.52 lbf.in (0.85 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"7500 mA maximum continuous 9000 mA peak","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.06 in (1.6 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55.2 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"104 N force pressure) 104 N tensile force)","Number of motor stacks":"2","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"5.04 lbf.in (0.57 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"107 N","Mounting holes diameter":"0.2 in (5.2 mm)","Centring collar diameter":"2.0 in (50 mm)","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"16384 points/turn","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"2.6 in (66.6 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d42dfd8d27452d4228334b8f349dc325.pdf","sourceUrl":"https://www.se.com/vn/en/product/ILA2P572TC1A0/integrated-drive-ila-with-servo-motor-24-48v-ethernet-powerlink-indus-conn/","alternativesUrl":"https://aoctrl.com/api/mcp/products/ILA2P572TC1A0/alternatives.json"},"ai":{"faq":[{"question":"What is the ILA2P572TC1A0's listed phase on this servo line?","answer":"The ILA2P572TC1A0 is listed as single phase on the servo motor rating line, with the supply limits set at 18 to 55.2 VDC — it is not a three-phase AC servo, it is a low-voltage DC bus servo integrated with its own drive."},{"question":"What is the ILA2P572TC1A0's listed length?","answer":"Overall length is 6.4 in (163.8 mm), measured end-to-end including the integrated drive housing behind the 57 mm flange — that is the axial envelope to budget for on the machine plate."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILA2P572TC1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILA2P572TC1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}